ASTM D3039/D3039M-14
Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
- Standard No.
- ASTM D3039/D3039M-14
- Release Date
- 2014
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM D3039/D3039M-17
- Latest
- ASTM D3039/D3039M-17
- Scope
5.1 This test method is designed to produce tensile property data for material specifications, research and development, quality assurance, and structural design and analysis. Factors that influence the tensile response and should therefore be reported include the following: material, methods of material preparation and lay-up, specimen stacking sequence, specimen preparation, specimen conditioning, environment of testing, specimen alignment and gripping, speed of testing, time at temperature, void content, and volume percent reinforcement. Properties, in the test direction, which may be obtained from this test method include the following:
5.1.1 Ultimate tensile strength,
5.1.2 Ultimate tensile strain,
5.1.3 Tensile chord modulus of elasticity,
5.1.4 Poisson's ratio, and
5.1.5 Transition strain.
1.1 This test method determines the in-plane tensile properties of polymer matrix composite materials reinforced by high-modulus fibers. The composite material forms are limited to continuous fiber or discontinuous fiber-reinforced composites in which the laminate is balanced and symmetric with respect to the test direction.
1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the inch-pound units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D3039/D3039M-14 Referenced Document
- ASTM D2584 Standard Test Method for Ignition Loss of Cured Reinforced Resins
- ASTM D2734 Standard Test Methods for Void Content of Reinforced Plastics
- ASTM D3171 Standard Test Methods for Constituent Content of Composite Materials
- ASTM D3878 Standard Terminology Composite Materials
- ASTM D5229/D5229M Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
- ASTM D792 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
- ASTM D883 Standard Terminology Relating to Plastics
- ASTM E1012 Standard Practice for Verification of Specimen Alignment Under Tensile Loading
- ASTM E111 Standard Test Method for Young''s Modulus, Tangent Modulus, and Chord Modulus
- ASTM E122 Standard Practice for Calculating Sample Size to Estimate, With a Specified Tolerable Error, the Average for Characteristic of a Lot or Process
- ASTM E1237 Standard Guide for Installing Bonded Resistance Strain Gages
- ASTM E132 Standard Test Method for Poisson''s Ratio at Room Temperature
- ASTM E177 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
- ASTM E251 Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
- ASTM E4 Standard Practices for Force Verification of Testing Machines
- ASTM E456 Standard Terminology for Relating to Quality and Statistics
- ASTM E6 Standard Terminology Relating to Methods of Mechanical Testing
- ASTM E83 Standard Practice for Verification and Classification of Extensometer
ASTM D3039/D3039M-14 history
- 2017 ASTM D3039/D3039M-17 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
- 2014 ASTM D3039/D3039M-14 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
- 2008 ASTM D3039/D3039M-08 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
- 2007 ASTM D3039/D3039M-07 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
- 2000 ASTM D3039/D3039M-00(2006) Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
- 2000 ASTM D3039/D3039M-00e2 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
- 2000 ASTM D3039/D3039M-00e1 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
- 2000 ASTM D3039/D3039M-00 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
