This standard specifies the product classification and naming, requirements, test methods, inspection rules, marking and packaging requirements for integrated LED lamps for decorative lighting. This standard is applicable to non-directional integrated LED lamps that are used as decorative lighting in homes and similar places and integrate LED light sources and stable ignition components. The scope of application is as follows:
——Rated voltage AC220 V, frequency 50 Hz;
——Screw-type lamp holder conforming to GB/T 1406.1 or bayonet-type lamp holder conforming to GB/T 1406.5;
——Outline dimensions conforming to GB/T 7249 Requirements: The maximum diameter of the lamp should not be greater than 50 mm. Any lamp that meets the requirements of this standard should be able to start and work normally under the conditions of 92% to 106% of the rated power supply voltage or the nominal operating voltage range, and the ambient temperature is between -20°C and 45°C.
QB/T 5209-2017 Referenced Document
GB 17625.1 Electromagnetic compatibility—Limits—Part 1: Limits for harmonic current emissions (equipment input current ≤ 16A per phase)*， 2022-12-29 Update
GB 24906 Self-ballasted LED lamps for general lighting services >50 V-Safety specifications
GB/T 1406.1 Types and dimensions of lamp caps.Part 1:Screw caps
GB/T 1406.5 Types and dimensions of lamp caps.Part5:Bayonet caps
GB/T 1483.1 Gauges for lamp caps and holders.Part 1:Gauges for screw caps and holders
GB/T 1483.5 Gauges for caps and lampholders.Part 5:Gauges for bayonet caps and lampholders
GB/T 17743 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment*， 2021-12-31 Update
GB/T 18595 Equipment for general lighting purposes.EMC immunity requirements
GB/T 24824 Measurement methods of LED modules for general lighting
GB/T 24826 General lighting-Light emitting diode(LED) products and related equipment.Terms and definitions
GB/T 24908 Non-directional self-ballasted LED-lamps for general lighting services.Performance requirements
GB/T 2828.1 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)
GB/T 2829 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
GB/T 7249 Maximum lamp outlines for incandescent lamps
QB/T 5209-2017 history
2017QB/T 5209-2017 Integrated LED-lamps for decorative lighting services.Performance specifications