GB 17625.1-2022 (English Version) PDF

Standard No.: GB 17625.1-2022
Language: Chinese, Available in English version
Release Date: 2022
Published By: General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Latest: GB 17625.1-2022
Replace: GB 17625.1-2012

Scope: This document deals with limits for harmonic currents injected into utility power supply systems. This document specifies the limits of the harmonic components of the input current that may be generated by the equipment under specified test conditions. This document applies to electrical and electronic equipment intended to be connected to the public low-voltage power distribution system with a rated input current of no more than 16A per phase. Non-dedicated arc welding equipment with a rated input current of no more than 16A per phase falls within the scope of this document. All other arc welding equipment does not apply to this document; however, its harmonic current emissions can be assessed using IEC61000 3 12 and related installation restrictions. The tests carried out in accordance with this document are type tests. For systems with a nominal voltage lower than 220V (phase voltage), the limits have not been considered. Note: Words such as device, appliance, component and equipment are used in this document, and they have the same meaning in this document.

GB 17625.1-2022 Referenced Document

GB/T 20550-2013 Glow-starters for fluorescent lamps
IEC 60107-1:1997 Methods of measurement on receivers for television broadcast transmissions - Part 1: General considerations - Measurements on displays at radio and video frequencies
IEC 60268-1:1985 Sound system equipment. Part 1 : General
IEC 60268-3:2018 Sound system equipment - Part 3: Amplifiers
IEC 60335-2-24:2010 Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
IEC 60335-2-2:2019 Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
IEC 60335-2-79:2016 Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners
IEC 60974-1:2017 Arc welding equipment - Part 1: Welding power sources
IEC 61000-4-7:2002 Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques; General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
IEC 62756-1:2015 Digital load side transmission lighting control (DLT) - Part 1: Basic requirements

2022 GB 17625.1-2022 Electromagnetic compatibility—Limits—Part 1: Limits for harmonic current emissions (equipment input current ≤ 16A per phase)
2013 GB 17625.1-2012 Electromagnetic Compatibility Limits Harmonic Current Emission Limits (Equipment Each Phase Input Current ≤ 16A)
2003 GB 17625.1-2003 Electromagnetic compatibility limits Limits for harmonic current emissions(equipment input current≤16 A per phase
1998 GB 17625.1-1998 The limits for the harmonic current emissions caused by low-voltage electrical and electronic equipments(equpment input current≤16 A per phase)