This European Standard defines terms and specifies characteristics for ceramic tiles, including mosaics (i.e. any piece that can fit into a square area of 49 cm2) produced by extrusion or dry-pressing techniques, used for internal and/or external floorings (including stairs) and/or walls. Furthermore, it provides the level of requirements for these characteristics and references to the test methods applied as well as provisions for the assessment and verification of the constancy of performance. This European Standard is not applicable to: - meshed backed products; - ceramic decorative accessories or trims (such as edges, corners, skirting, capping, coves, beads, curved tiles and other accessory pieces); - ceramic tiles made by processes other than extrusion or dry-pressing; - dry-pressed unglazed ceramic tiles with water absorption greater than 10 %; - ceramic tiles used for floorings on external road finishes; - ceramic tiles used in ceiling finishes or suspended ceilings.
EN 14411:2016 Referenced Document
EN 13501-1:2007 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests (Incorporates Amendment A1: 2009)
EN ISO 10545-10:1997 Ceramic Tiles - Part 10: Determination of Moisture Expansion Supersedes EN 155: 1991; ISO 10545-10: 1995
EN ISO 10545-11:1996 Ceramic Tiles Part 11: Determination of Crazing Resistance for Glazed Tiles Supersedes EN 105: 1991
EN ISO 10545-12:1997 Ceramic Tiles - Part 12: Determination of Frost Resistance Supersedes EN 202: 1991; ISO 10545-12: 1995, Including Technical Corrigendum 1: 1997 [Superseded: CEN EN 202]
EN ISO 10545-13:1997 Ceramic Tiles Part 13: Determination of Chemical Resistance
EN ISO 10545-14:2015 Ceramic Tiles - Part 14: Determination of Resistance to Stains
EN ISO 10545-15:1997 Ceramic Tiles - Part 15: Determination of Lead and Cadmium Given off by Glazed Tiles ISO 10545-15: 1995
EN ISO 10545-16:2012 Ceramic tiles - Part 16: Determination of small colour differences
EN ISO 10545-1:2014 Ceramic tiles - Part 1: Sampling and basis for acceptance
EN ISO 10545-2:1997 Ceramic Tiles - Part 2: Determination of Dimensions and Surface Quality Supersedes EN 98: 1991
EN ISO 10545-3:1997 Ceramic Tiles - Part 3: Determination of Water Absorption, Apparent Porosity, Apparent Relative Density and Bulk Density Supersedes EN 99: 1991; ISO 10545-3: 1995, Including Technical Corrigendum 1: 1997 [Superseded: CEN EN 99]
EN ISO 10545-4:2014 Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2014)
EN ISO 10545-5:1997 Ceramic Tiles - Part 5: Determination of Impact Resistance by Measurement of Coefficient of Restriction ISO 10545-5:1996, Including Technical Corrigendum 1:1996
EN ISO 10545-6:2012 Ceramic tiles - Part 6: Determination of resistance to deep abrasion for unglazed tiles (ISO 10545-6:2010)
EN ISO 10545-7:1998 Ceramic tiles - Part 7: Determination of resistance to surface abrasion for glazed tiles
EN ISO 10545-8:2014 Ceramic tiles - Part 8: Determination of linear thermal expansion
EN ISO 10545-9:2013 Ceramic tiles - Part 9: Determination of resistance to thermal shock
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
ISO 1006:1983 Building construction; Modular coordination; Basic module
EN 14411:2016 history
2016EN 14411:2016 Ceramic tiles - Definition@ classification@ characteristics@ assessment and verification of constancy of performance and marking
2012EN 14411:2012 Ceramic tiles - Definitions, classification, characteristics, evaluation of conformity and marking
2006EN 14411:2006 Ceramic tiles - Definitions@ classification@ characteristics and marking
2003EN 14411:2003 Ceramic tiles - Definitions@ classification@ characteristics and marking