ISO 11424:2017
Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - Specification
- Standard No.
- ISO 11424:2017
- Release Date
- 2017
- Published By
- International Organization for Standardization (ISO)
- Status
- Replace By
- ISO 11424:2023
- Latest
- ISO 11424:2023
- Scope
- This document specifies requirements for rubber hoses and tubing for use in the various air and vacuum systems found on internal combustion engines. This document does not cover hoses used for direct power-brake actuation in trucks and trailers, nor for air intakes and ducting within the passenger compartment. The highest-temperature hoses are generally used for turbocharger applications. All hoses and tubing remain serviceable down to −40°C. NOTE Although the term vacuum is generally used, in reality the application is one of reduced air pressure used for the purposes of actuation or monitoring of the various engine-system components. The air carried by the tubing or hoses may be clean and free of contaminants but may also contain oil, fuel and their vapours as contamination, due to the particular installation and application.
ISO 11424:2017 Referenced Document
- ISO 10619-1:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature
- ISO 10619-2:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures
- ISO 1402:2009 Rubber and plastics hoses and hose assemblies - Hydrostatic testing
- ISO 1629:2013 Rubber and latices - Nomenclature
- ISO 1817:2015 "Rubber, vulcanized or thermoplastic - Determination of the effect of liquids"
- ISO 188:2011 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
- ISO 19013-1:2005 Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 1: Diesel fuels
- ISO 3302-1:2014 Rubber - Tolerances for products - Part 1: Dimensional tolerances
- ISO 37:2011 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
- ISO 4671:2007 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
- ISO 48:2010 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
- ISO 7233:2016 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum
- ISO 7326:2016 Rubber and plastics hoses - Assessment of ozone resistance under static conditions
- ISO 8033:2016 Rubber and plastics hoses - Determination of adhesion between components
- ISO 815-1:2014 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures
- ISO 8330:2014 Rubber and plastics hoses and hose assemblies - Vocabulary
- ISO 8331:2016 Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance
ISO 11424:2017 history
- 2023 ISO 11424:2023 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification
- 2017 ISO 11424:2017 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - Specification
- 1996 ISO 11424:1996 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - Specification
