This European Standard covers membranes, individual substructure components, substructure kits and suspended ceiling kits intended to be placed on the market. It covers suspended ceilings sold as a complete kit, substructures placed on the market as kits, individual components (products) of such substructures, and membrane components. It includes test methods and methods of assessment, as well as provisions for the evaluation of conformity and for the marking of the products to the requirements of this European Standard. In the absence of any other European Standard, this European Standard specifies dimensions, tolerances and, where relevant, performance requirements, for commonly available ceiling substructures and membrane components. This European Standard covers the following characteristics: reaction to fire; fire resistance (suspended ceiling kits only); release and/or content of dangerous substances: release of asbestos (content) (suspended ceiling kits and membrane components only); release of formaldehyde (suspended ceiling kits and membrane components only); other dangerous substances; shatter properties (safe breakage)/impact resistance (for suspended ceiling kits and membrane components of brittle materials in suspended ceiling kits only); flexural tensile strength; load bearing capacity, tolerances and dimensions; electrical safety (as adequacy of the product to avoid electrocution from installations that may be part of the assembled ceiling, using electricity, such as ventilation devices and lighting); direct airborne sound insulation (suspended ceiling kits only); sound absorption (suspended ceiling kits and membrane components only); thermal conductivity (suspended ceiling kits and membrane components only); susceptibility to the growth of harmful micro-organisms; resistance to fixings (relevant for components that are mechanically fixed); durability of flexural tensile strength and load bearing capacity against moisture.
EN 13964:2014 Referenced Document
EN 10143:2006 Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape
EN 10152:2009 Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions (Incorporating corrigendum December 2011)
EN 10244-2:2009 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings
EN 120:1992 Wood Based Panels - Determination of Formaldehyde Content - Extraction Method Called the Perforator Method
EN 12354-6:2003 Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 6: Sound absorption in enclosed spaces*, 2024-04-20 Update
EN 12600:2002 Glass in building - Pendulum test - Impact test method and classification for flat glass*, 2024-04-20 Update
EN 12602:2008 Prefabricated reinforced components of autoclaved aerated concrete (Incorporates Amendment A1: 2013)
EN 12664:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance
EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
EN 13162:2012 Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification (Incorporates Amendment A1: 2015)*, 2024-04-20 Update
EN 1396:2007 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
EN 1912:2012 Structural Timber - Strength classes - Assignment of visual grades and species (Incorporating corrigendum August 2013)
EN 1991-1-4:2005 Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
EN 1992-2:2005 Eurocode 2 - Design of concrete structures - Concrete bridges - Design and detailing rules*, 2024-04-20 Update
EN 1993-1-1:2005 Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
EN 1995-1-1:2004 Eurocode 5 - Design of timber structures - Part 1-1: General - Common rules and rules for buildings*, 2024-04-20 Update
EN 1998-1:2004 Eurocode 8 - Design of structures for earthquake resistance - Part 1: General rules, Seismic action and rules for buildings*, 2024-04-20 Update
EN 335:2013 Durability of wood and wood-based products - Use classes: definitions@ application to solid wood and wood-based products
EN 350-1:1994 Durability of Wood and Wood-Based Products - Natural Durability of Solid Wood Part 1: Guide to the Principles of Testing and Classification of the Natural Durability of Wood
EN 350-2:1994 Durability of Wood and Wood-Based Products - Natural Durability of Solid Wood Part 2: Guide to Natural Durability and Treatability of Selected Wood Species of Importance in Europe
EN 351-1:2007 Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention
EN 351-2:2007 Durability of wood and wood-based products - Preservative-treated solid wood - Part 2: Guidance on sampling for the analysis of preservative-treated wood
EN 460:1994 Durability of wood and wood-based products - Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes
EN 520:2004 Gypsum plasterboards - Definitions, requirements and test methods (Incorporates Amendment A1: 2009)*, 2024-04-20 Update
EN 573-3:2013 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products*, 2024-04-20 Update
EN 599-2:1995 Durability of Wood and Wood-Based Products - Performance of Preventive Wood Preservatives as Determined by Biological Tests - Part 2: Classification and Labelling
EN 622-1:2003 Fibreboards - Specifications - Part 1: General requirements
EN 717-1:2004 Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method*, 2024-04-20 Update
EN 717-2:1994 Wood-based panels - Determination of formaldehyde release - Part 2: Formaldehyde release by the gas analysis method (Incorporating Corrigendum July 2002)
EN 13964:2014 history
2014EN 13964:2014 Suspended ceilings - Requirements and test methods
2004EN 13964:2004 Suspended ceilings - Requirements and test methods (Incorporates Amendment A1: 2006; Remains Current)