DIN EN ISO 4064-2:2014
Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014); German version EN ISO 4064-2:2014

Standard No.

DIN EN ISO 4064-2:2014

Release Date

2014

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN EN ISO 4064-2 E:2016-09

Latest

DIN EN ISO 4064-2:2023-12

Replace

DIN EN 14154-3:2011 DIN EN ISO 4064-2:2011

DIN EN ISO 4064-2:2014 Referenced Document

• DIN EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000); German version EN ISO 228-1:2003
• DIN EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010); German version EN ISO 286-2:2010
• DIN EN ISO 4064-1:2014 Water meters for cold potable water and hot water - Part 1: Metrological and technical requirements (ISO 4064-1:2014); German version EN ISO 4064-1:2014
• DIN EN ISO 4064-3:2014 Water meters for cold potable water and hot water - Part 3: Test report format (ISO 4064-3:2014); German version EN ISO 4064-3:2014
• DIN EN ISO 5167-1:2004 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003); German version EN ISO 5167-1:2003
• IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
• IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
• IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
• IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
• IEC 60068-2-31:2008 Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
• IEC 60068-2-47:2005 Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests
• IEC 60068-2-64:2008 Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broad-band random and guidance

DIN EN ISO 4064-2:2014 history

• 2023 DIN EN ISO 4064-2:2023-12 Water meters for cold potable water and hot water - Part 2: Test methods (ISO/DIS 4064-2:2023); German and English version prEN ISO 4064-2:2023 / Note: Date of issue 2023-11-10*Intended as replacement for DIN EN ISO 4064-2 (2017-10), DIN EN ISO 4064-2/...
• 2023 DIN EN ISO 4064-2/A11:2023-02 Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014); German version EN ISO 4064-2:2017/A11:2022
• 2023 DIN EN ISO 4064-2/A11:2023 Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014)
• 2017 DIN EN ISO 4064-2:2017-10 Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014); German version EN ISO 4064-2:2017 / Note: This standard is part of the DVGW body of rules.
• 2017 DIN EN ISO 4064-2:2017 Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014)
• 1970 DIN EN ISO 4064-2 E:2016-09
• 2014 DIN EN ISO 4064-2:2014 Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014); German version EN ISO 4064-2:2014
• 1970 DIN EN ISO 4064-2 E:2011-05
• 0000 DIN EN ISO 4064-2:2011
• 0000 DIN EN 14154-3/A2:2010
• 2007 DIN EN 14154-3:2007 Water meters - Part 3: Test methods and equipment German version EN 14154-3:2005+A1:2007

DIN EN ISO 4064-2:2014 Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014); German version EN ISO 4064-2:2014 has been changed from DIN EN 14154-3:2011 Water meters - Part 3: Test methods and equipment; German version EN 14154-3:2005+A2:2011.