DIN ISO 11529:2014
Milling cutters - Designation - Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges (ISO 11529:2013)

Standard No.

DIN ISO 11529:2014

Release Date

2014

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN ISO 11529 E:2014-04

Latest

DIN ISO 11529:2014-10

Replace

DIN ISO 11529-1:2007 DIN ISO 11529-2:2007

DIN ISO 11529:2014 Referenced Document

• DIN 2080-1:2011 7/24 taper shanks for tools and clamping devices - Part 1: Type A
• DIN ISO 7388-1:2014 Tool shanks with 7/24 taper for automatic tool changers - Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF (ISO 7388-1:2007)
• ISO 12164-1:2001 Hollow taper interface with flange contact surface - Part 1: Shanks; Dimensions
• ISO 13399-1:2006 Cutting tool data representation and exchange - Part 1: Overview, fundamental principles and general information model
• ISO 296:1991 Machine tools; self-holding tapers for tool shanks
• ISO 297:1988 7/24 tapers for tool shanks for manual changing
• ISO 3002-1:1982 Basic quantities in cutting and grinding; Part 1 : Geometry of the active part of cutting tools; General terms, reference systems, tool and working angles, chip breakers
• ISO 3002-3:1984 Basic quantities in cutting and grinding; Part 3 : Geometric and kinematic quantities in cutting
• ISO 3338-1:1996 Cylindrical shanks for milling cutters - Part 1: Dimensional characteristics of plain cylindrical shanks
• ISO 3338-2:2013 Cylindrical shanks for milling cutters.Part 2: Dimensional characteristics of flatted cylindrical shanks
• ISO 3338-3:1996 Cylindrical shanks for milling cutters - Part 3: Dimensional characteristics of threaded shanks
• ISO 5413:1993 Machine tools; positive drive of morse tapers
• ISO 6462:2011 Face and shoulder milling cutters with indexable inserts - Dimensions
• ISO 7388-1:2007 Tool shanks with 7/24 taper for automatic tool changers - Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF

DIN ISO 11529:2014 history

• 2014 DIN ISO 11529:2014-10 Milling cutters - Designation - Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges (ISO 11529:2013)
• 1970 DIN ISO 11529 E:2014-04
• 2014 DIN ISO 11529:2014 Milling cutters - Designation - Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges (ISO 11529:2013)
• 2007 DIN ISO 11529-2:2007 Milling cutters - Designation - Part 2: Shank-type and bore-type milling cutters with indexable inserts (ISO 11529-2:2005) English version of DIN ISO 11529-2-2007-05