DIN ISO 7388-1:2014
Tool shanks with 7/24 taper for automatic tool changers - Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF (ISO 7388-1:2007)

Standard No.

DIN ISO 7388-1:2014

Release Date

2014

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN ISO 7388-1:2014-07

Latest

DIN ISO 7388-1:2014-07

Replace

DIN 69871-1:1995 DIN ISO 7388-1:2013

DIN ISO 7388-1:2014 Referenced Document

• DIN EN ISO 8015:2011 Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011); German version EN ISO 8015:2011
• DIN ISO 2768-1:1991 General tolerances; tolerances for linear and angular dimensions without individual tolerance indications; identical with ISO 2768-1:1989
• DIN ISO 2768-2:1991 General tolerances; geometrical tolerances for features without individual tolerances indications; identical with ISO 2768-2:1989
• ISO 2768-1:1989 General tolerances; part 1: tolerances for linear and angular dimensions without individual tolerance indications
• ISO 2768-2:1989 General tolerances; part 2: geometrical tolerances for features without individual tolerance indications
• ISO 8015:2011 Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules
• ISO 9270:1992 7/24 tapers for tool shanks for automatic changing; tapers for spindle noses

DIN ISO 7388-1:2014 history

• 2014 DIN ISO 7388-1:2014-07 Tool shanks with 7/24 taper for automatic tool changers - Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF (ISO 7388-1:2007)
• 2014 DIN ISO 7388-1:2014 Tool shanks with 7/24 taper for automatic tool changers - Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF (ISO 7388-1:2007)
• 1970 DIN ISO 7388-1 E:2013-10
• 0000 DIN ISO 7388-1:2013
• 1995 DIN 69871-1:1995 Tool shanks with 7/24 taper for automatic tool exchange - Part 1: Type A, type AD, type B and with data media

DIN ISO 7388-1:2014 Tool shanks with 7/24 taper for automatic tool changers - Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF (ISO 7388-1:2007) has been changed from DIN 69871-1:1995 Tool shanks with 7/24 taper for automatic tool exchange - Part 1: Type A, type AD, type B and with data media.