International Organization for Standardization (ISO)
Latest
ISO 8029:2014
Scope
This International Standard specifies the requirements for four types of textile-reinforced thermoplastics collapsible water hoses for general applications for use in the temperature range of −10 °C to 55 °C. Such hoses are classified into four types, as follows:
— low pressure, designed for a maximum working pressure of up to 0,4 MPa (4,0 bar) at 23 °C and up to 0,2 MPa (2,0 bar) at 55 °C;
— medium pressure, for a maximum working pressure of up to 0,7 MPa (7,0 bar) at 23 °C and up to 0,36 MPa (3,6 bar) at 55 °C;
— high pressure, for a maximum working pressure of up to 1,0 MPa (10,0 bar) at 23 °C and up to 0,51 MPa (5,1 bar) at 55 °C;
— extra-high pressure, for a maximum working pressure of up to 1,55 MPa (15,5 bar) at 23 °C and up to 0,79 MPa (7,9 bar) at 55 °C.
This International Standard does not apply to products used for fire-fighting or the conveyance of drinking water.
ISO 8029:2014 Referenced Document
ISO 10619-1:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature
ISO 10619-2:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures
ISO 1307:2006 Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
ISO 1402:2009 Rubber and plastics hoses and hose assemblies - Hydrostatic testing
ISO 14557:2002 Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies
ISO 188:2011 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
ISO 23529:2010 Rubber - General procedures for preparing and conditioning test pieces for physical test methods
ISO 30013:2011 Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties
ISO 37:2011 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 3:1973 Preferred numbers; Series of preferred numbers
ISO 8033:2006 Rubber and plastics hoses - Determination of adhesion between components
ISO 8330:2014 Rubber and plastics hoses and hose assemblies - Vocabulary
ISO 8331:2014 Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance
ISO 9352:2012 Plastics - Determination of resistance to wear by abrasive wheels
ISO/TR 17784:2003 Rubber and plastics hoses and hose assemblies - Guide for use by purchasers, assemblers, installers and operating personnel