ISO 8029:2007
Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification
- Standard No.
- ISO 8029:2007
- Release Date
- 2007
- Published By
- International Organization for Standardization (ISO)
- Status
- Replace By
- ISO 8029:2014
- Latest
- ISO 8029:2014
- Scope
- This International Standard specifies the requirements for four types of textile-reinforced thermoplastics collapsible water hoses for general applications for use in the temperature range of ?10 °C to +55 °C. Such hoses are classified into four types, as follows: - low pressure, designed for a maximum working pressure of up to 4,0 bar at 23 °C and up to 2,0 bar at 55 °C; - medium pressure, for a maximum working pressure of up to 7,0 bar at 23 °C and up to 3,6 bar at 55 °C; - high pressure, for a maximum working pressure of up to 10,0 bar at 23 °C and up to 5,1 bar at 55 °C; - extra-high pressure, for a maximum working pressure of up to 15,5 bar at 23 °C and up to 7,9 bar at 55 °C. This standard does not apply to products used for fire-fighting or the conveyance of drinking water.
ISO 8029:2007 Referenced Document
- ISO 1307 Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
- ISO 1402 Rubber and plastics hoses and hose assemblies - Hydrostatic testing*， 2021-03-31 Update
- ISO 1746 Rubber or plastics hoses and tubing - Bending tests
- ISO 188 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests*， 2023-03-09 Update
- ISO 23529 Rubber - General procedures for preparing and conditioning test pieces for physical test methods*， 2016-11-01 Update
- ISO 3 Preferred numbers; Series of preferred numbers
- ISO 37 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties*， 2017-11-01 Update
- ISO 4892-2 Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps — Amendment 1: Classification of daylight filters*， 2021-08-03 Update
- ISO 4892-3 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps*， 2016-02-01 Update
- ISO 4892-4 Plastics.Methods of exposure to laboratory light sources.Part 4: Open-flame carbon-arc lamps*， 2013-07-15 Update
- ISO 8033 Rubber and plastics hoses - Determination of adhesion between components*， 2016-12-01 Update
- ISO 8330 Rubber and plastics hoses and hose assemblies — Vocabulary*， 2022-03-28 Update
- ISO 8331 Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance*， 2016-11-01 Update
- ISO 9352 Plastics - Determination of resistance to wear by abrasive wheels*， 2012-04-01 Update
- ISO/TR 17784:2003 Rubber and plastics hoses and hose assemblies - Guide for use by purchasers, assemblers, installers and operating personnel
ISO 8029:2007 history
- 2014 ISO 8029:2014 Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification
- 2007 ISO 8029:2007 Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification
- 1985 ISO 8029:1985 Plastics hose; General purpose collapsible water hose, textile reinforced; Specification
