ASTM B700-08(2014)
Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
- Standard No.
- ASTM B700-08(2014)
- Release Date
- 2008
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM B700-20
- Latest
- ASTM B700-20
- Scope
1.1 This specification covers requirements for electrodeposited coatings of silver used for engineering purposes that may be mat, bright, or semibright and are not less than 988201;% silver purity.
1.2 Coatings of silver covered by this specification are usually employed for solderable surfaces, electrical contact characteristics, high electrical and thermal conductivity, thermocompression bonding, wear resistance of load-bearing surfaces, and spectral reflectivity.
1.3 In the Appendixes important characteristics of electrodeposited silver coatings are briefly described which must be considered when used in engineering applications, namely electrical conductivity (see Appendix X1), silver migration (see Appendix X2), thickness (see Appendix X3), hardness (see Appendix X4), and atmospheric tarnish (see Appendix X5).
1.4 The following hazards caveat pertains only to the test methods section of this specification: This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM B700-08(2014) Referenced Document
- ASTM B183 Standard Practice for Preparation of Low-Carbon Steel for Electroplating
- ASTM B242 Standard Guide for Preparation of High-Carbon Steel for Electroplating
- ASTM B252 Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
- ASTM B253 Standard Guide for Preparation of Aluminum Alloys for Electroplating
- ASTM B254 Standard Practice for Preparation of and Electroplating on Stainless Steel
- ASTM B281 Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings
- ASTM B322 Standard Guide for Cleaning Metals Prior to Electroplating
- ASTM B343 Standard Practice for Preparation of Nickel for Electroplating with Nickel
- ASTM B374 Standard Terminology Relating to Electroplating
- ASTM B481 Standard Practice for Preparation of Titanium and Titanium Alloys
for Electroplating - ASTM B482 Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating
- ASTM B487 Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section
- ASTM B499 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
- ASTM B504 Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
- ASTM B507 Standard Practice for Design of Articles to Be Electroplated on Racks
- ASTM B542 Standard Terminology Relating to Electrical Contacts and Their Use
- ASTM B567 Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method*， 2024-04-20 Update
- ASTM B568 Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
- ASTM B571 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
- ASTM B578 Standard Test Method for Microhardness of Electroplated Coatings
- ASTM B579 Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)
- ASTM B602 Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings
- ASTM B678 Standard Test Method for Solderability of Metallic-Coated Products
- ASTM B697 Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings
- ASTM B762 Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings
- ASTM B8 Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
- ASTM B849 Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
- ASTM B850 Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement
- ASTM D3951 Standard Practice for Commercial Packaging
- ASTM E1004 Standard Practice for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method
- ASTM F519 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating Processes and Service Environments
ASTM B700-08(2014) history
- 2020 ASTM B700-20 Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
- 2008 ASTM B700-08(2014) Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
- 2008 ASTM B700-08 Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
- 1997 ASTM B700-97(2002) Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
- 1997 ASTM B700-97 Standard Test Method for Electrodeposited Coatings of Silver for Engineering Use
