HG/T 4595-2014 (English Version) PDF

Scope: This standard specifies the terms and definitions, specification series and main technical parameters, requirements, inspection and test methods, inspection rules, product packaging, transportation, storage and factory delivery technical documents of thermosetting powder coating micronization equipment. This standard applies to thermosetting powder coating micron powder crushing equipment.

HG/T 4595-2014 Referenced Document

GB 12265.3 Safety of machinery--Minimum gaps to avoid crushing of parts of the human body
GB 150 Pressure Vessels (Bound Edition)*， 2024-04-20 Update
GB 15577 Safety regulations for dust explosion prevention and protection*， 2018-11-19 Update
GB 16297 Comprehensive emission standard of air pollutants
GB 16754 Safety of machinery.Emergency stop.Principles for design
GB 23821 Safety of machinery-Safety distances to prevent hazard zones being reached by upper and lower limbs
GB 2894 Safety signs and guideline for the use
GB 4208 Degrees of protection provided by enclosure(IP code)
GB 5226.1 Safety of machinery--Electrical equipment of machines--Part 1: General requirements*， 2019-06-04 Update
GB/T 13306 Plates
GB/T 15605 Guide for pressure venting of dust explosions
GB/T 15706.2 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
GB/T 191 Packaging.Pictorial marking for handling of goods
GB/T 19678 Preparation of instructions-Structuring,content and presentation
GB/T 25295 Guidelines on safety disigns for electric equipments
GB/T 5465.1 Graphical symbols for use on electrical equipment-Part1:Overview and classification
GB/T 5465.2 Graphical symbols for electrical equipment Part 2: Graphical symbols*， 2023-12-28 Update
GB/T 6404.1 Acceptance code for gear units.Part 1:Test code for airborne sound
GB/T 6988.1 Preparation of documents used in electrotechnology.Part 1:Rules
HG/T 2006-2006 Thermosetting powder coatings