This standard specifies the operating conditions, performance requirements, test methods, inspection rules and markings of spark gaps (hereinafter referred to as spark gaps or gaps) used for series capacitor compensation devices in AC transmission systems. This standard applies to controlled trigger type (forced trigger type) spark gaps. The series compensation device uses a controlled trigger spark gap in conjunction with other protection equipment to quickly bypass (protect) the capacitor bank and the metal oxide voltage limiter (MOV).
DL/T 1295-2013 Referenced Document
GB 311.1 Insulation co-ordination.Part 1:Definitions,principles and rules
GB 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 15153.1-1998 Telecontrol equipment and systems. Part 2: Operating conditions. Section 1: Power supply and electromagnetic compatibility
GB/T 15153.2-2000 Telecontrol equipment and systems Part 2: Operating conditions Section2: Environmental conditions (Climatic,mechanical and other non-electrical influences)
GB/T 16927.2 High-voltage test techniques.Part 2:Measuring systems
GB/T 176 Cement Chemical Analysis Methods*, 2018-11-01 Update
GB/T 17626.3 Electromagnetic compatibility test and measurement technology Part 3: Radio frequency electromagnetic field radiation immunity test*, 2023-12-28 Update
GB/T 17626.4 Electromagnetic compatibility-Testing and measurement techniques-Electrical fast transient/burst immunity test*, 2018-06-07 Update
GB/T 17626.6 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields*, 2017-12-29 Update
GB/T 191 Packaging.Pictorial marking for handling of goods
GB/T 2423.1-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests A:Cold
GB/T 2423.10-2008 Environmental testing for electric and electronic products.Part 2:Tests methods Test Fc:Vibration(sinusoidal)
GB/T 2423.2-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests B:Dry heat
GB/T 2423.4-2008 Environmental testing for electrical and electronic products - Part 2: Test method Test Db alternating damp heat (12h + 12h cycle)
GB/T 6115.2-2002 Series capacitors for power systems Part 2: Protective equipment for series capacitor banks
DL/T 1295-2013 history
2013DL/T 1295-2013 Spark gaps for series capacitor banks