CJ/T 217-2013
Compound quick air inbreathe-release valve for water supply pipeline (English Version)

Standard No.

CJ/T 217-2013

Language

Chinese, Available in English version

Release Date

2013

Published By

Professional Standard - Urban Construction

Latest

CJ/T 217-2013

Replace

CJ/T 217-2005

Scope

This standard specifies the terms and definitions, structural types, product models, materials, requirements, test methods, inspection rules, signs, product instructions, packaging, storage transport. This standard applies to inlet and exhaust valves on water supply pipelines with nominal sizes DN15~DN300, nominal pressures not greater than PN25, and water temperatures 0℃~40℃.

CJ/T 217-2013 Referenced Document

• GB/T 1047 Pipework components—Definition and selection of nominal size*， 2019-03-25 Update
• GB/T 1048 Pipework components—Definition and selection of nominal pressure*， 2019-05-10 Update
• GB/T 12220 Industrial valves.Marking*， 2015-05-15 Update
• GB/T 12225 General purpose industrial valves.Specification of copper alloy castings*， 2018-05-14 Update
• GB/T 12227 General purpose industrial valves.Specification of spheroidal graphite iron castings
• GB/T 13927 Industrial valves—Pressure testing*， 2022-12-30 Update
• GB/T 17241.6 Integral cast iron flanges
• GB/T 17241.7 Specifications for cast iron pipe flanges
• GB/T 196 General purpose metric screw threads--Basic dimensions
• GB/T 197 General purpose metric screw threads—Tolerances*， 2018-03-15 Update
• GB/T 21873 Rubber seals.Joint rings for water supply,drainage and sewerage pipelines.Specification for materials
• GB/T 3098.1 Mechanical properties of fasteners.Blots, screws and studs
• GB/T 3098.10 Mechanical properties of fasteners Bolts, scrows, studs and nuts made of non-ferrous metals
• GB/T 3098.11 Mechanical properties of fasteners--Drilling screws with tapping screw thread
• GB/T 3098.12 Mechanical properties of fasteners--Cone proof load test on nuts
• GB/T 3098.13 Mechanical properties of fasteners--Torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm
• GB/T 3098.14 Mechanical properties of fasteners-Widening test on nuts
• GB/T 3098.15 Mechanical properties of fasteners—Stainless steel nuts*， 2023-05-23 Update
• GB/T 3098.16 Mechanical properties of fasteners.Stainless steel set screws*， 2014-06-24 Update
• GB/T 3098.17 Mechanical Properties of fasteners-Preloading test for the detection of hydrogen embrittlement-Parallel bearing surface method
• GB/T 3098.18 Mechanical properties of fasteners--Blind rivets testing
• GB/T 3098.19 Mechanical properties of fasteners-Blind rivets with break pull mandrel
• GB/T 3098.2 Mechanical properties of fasteners.Nuts*， 2015-12-10 Update
• GB/T 3098.20 Mechanical properties of fasteners-Wing nuts with specified proof torque
• GB/T 3098.21 Mechanical properties of fasteners.Stainless steel tapping screws*， 2014-06-24 Update
• GB/T 3098.22 Mechanical properties of fasteners made of the fine grain non-heat treatment steel.Bolts,screws and studs
• GB/T 3098.23 Mechanical properties of fasteners—M42～M72 bolts, screws and studs*， 2020-03-31 Update
• GB/T 3098.24 Mechanical properties of fasteners—Stainless steel and nickel alloys bolts, screws, studs and nuts for high temperature applications*， 2020-11-19 Update
• GB/T 3098.25 Mechanical properties of fasteners—Guidance for the selection of stainless steels and nickel alloys for fasteners*， 2020-11-19 Update
• GB/T 3098.26 Mechanical properties of fasteners—Flat washers*， 2021-12-31 Update
• GB/T 3098.3 Mechanical properties of fasteners.Set screws*， 2016-02-24 Update
• GB/T 3098.4 Mechanical properties of fasteners-Nuts-Fine pitch thread
• GB/T 3098.5 Mechanical properties of fasteners.Tapping screws*， 2016-02-24 Update
• GB/T 3098.6 Mechanical properties of fasteners—Stainless steel bolts，screws and studs*， 2023-05-23 Update
• GB/T 3098.7 Mechanical properties of fasteners-Thread rolling screws
• GB/T 3098.8 Mechanical properties of fasteners.Parts for bolted connections for use at temperatures from -200℃～+700℃
• GB/T 3098.9 Mechanical properties of fasteners—Prevailing torque type steel nuts*， 2020-03-31 Update
• GB/T 3280 Cold rolled stainless steel plate, sheet and strip*， 2015-09-11 Update
• GB/T 6739-2006 Paints and varnishes-Determination of film hardness by pencil test
• GB/T 700 Carbon structural steels
• GB/T 7306.2 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 2:Taper internal and external threads
• GB/T 9286-1998 Paints and varnishes--Cross cut test for films
• GB/T 9969 General principles for preparation of instructions for use of industrial products
• JB/T 308 Valves model designation method
• JB/T 7928 Industrial valves.Delivery specification*， 2014-07-09 Update

CJ/T 217-2013 history

• 2013 CJ/T 217-2013 Compound quick air inbreathe-release valve for water supply pipeline
• 2005 CJ/T 217-2005 Compound quick air inbreathe-release valve for water supply pipeline