ISO 6162-2:2012
Hydraulic fluid power.Flange connections with split or one-piece flange clamps and metric or inch screws.Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
- Standard No.
- ISO 6162-2:2012
- Release Date
- 2012
- Published By
- International Organization for Standardization (ISO)
- Status
- Replace By
- ISO 6162-2:2018
- Latest
- ISO 6162-2:2018
- Scope
- This part of ISO 6162 gives general and dimensional specifications for flanged heads, split flange clamps (FCS and FCSM), one-piece flange clamps (FC and FCM), ports and mounting surfaces applicable to fourscrew,split and one-piece flange clamp type tube connectors and hose fittings for use at a pressure of 42 MPa (420 bar
). It also specifies the dimensions of the seals to be used, as well as the grooves that house the seals.
ISO 6162-2:2012 Referenced Document
- ANSI/ASME B18.3 Socket Cap, Shoulder, Set Screws, and Hex Keys (Inch Series)*， 2024-04-20 Update
- ASTM A574 Standard Specification for Alloy Steel Socket-Head Cap Screws*， 2021-12-01 Update
- ISO 1302 Geometrical Product Specifications (GPS) — Indication of surface texture in technical product documentation — Amendment 2: Indication of material ratio requirements
- ISO 19879 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections*， 2021-02-28 Update
- ISO 261 ISO general purpose metric screw threads - General plan
- ISO 263 ISO inch screw threads; General plan and selection for screws, bolts and nuts; Diameter range 0,06 to 6 in
- ISO 2768-1 General tolerances; part 1: tolerances for linear and angular dimensions without individual tolerance indications
- ISO 3601-1 Fluid power systems - O-rings - Part 1: Inside diameters, cross-sections, tolerances and designation codes; Technical Corrigendum 1
- ISO 3601-3 Fluid power systems — O-rings — Part 3: Quality acceptance criteria
- ISO 4017 Fasteners — Hexagon head screws — Product grades A and B*， 2022-06-28 Update
- ISO 4762 Hexagon socket head cap screws
- ISO 48 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
- ISO 5598 Fluid power systems and components — Vocabulary*， 2020-01-06 Update
- ISO 7089 Plain washers - Normal series - Product grade A
- ISO 724 ISO general purpose metric screw threads — Basic dimensions*， 2023-04-01 Update
- ISO 725 ISO inch screw threads - Basic dimensions
- ISO 898-1 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread; Technical Corrigendum 1*， 2013-04-01 Update
- ISO 9227 Corrosion tests in artificial atmospheres — Salt spray tests — Amendment 1: Footnote of Warning*， 2024-02-19 Update
- SAE J429 Mechanical and Material Requirements for Externally Threaded Fasteners*， 2014-05-07 Update
ISO 6162-2:2012 history
- 2018 ISO 6162-2:2018 Hydraulic fluid power - Flange connections with split or one-piece flange clamps and metric or inch screws - Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
- 2012 ISO 6162-2:2012 Hydraulic fluid power.Flange connections with split or one-piece flange clamps and metric or inch screws.Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
- 2002 ISO 6162-2:2002 Hydraulic fluid power - Flange connectors with split or one-piece flange champs and metric or inch screws - Part 2: Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51
