SY/T 6913-2012
Specification for marine drilling riser equipment (English Version)

Standard No.

SY/T 6913-2012

Language

Chinese, Available in English version

Release Date

2012

Published By

Professional Standard - Petroleum

Status

Be replaced 2019-03

Replace By

SY/T 6913-2018

Latest

SY/T 6913-2018

Scope

This standard specifies the performance and quality requirements for the design, manufacture and assembly of offshore drilling riser equipment used to connect subsea blowout preventer stacks. This standard applies to the following main subsystems of offshore drilling riser systems: a) Riser tensioner. b) Flexible/ball joint. c) Choke/Kill and auxiliary lines. d) Suspension hose and jumper piping with flex/ball joints. e) Expansion joints and tension rings. f) Single riser. g) Buoyancy devices. h) Riser access equipment. i) Special components for riser systems. j) Reducing joint at the lower part of the riser.

SY/T 6913-2012 Referenced Document

• API 
• API Bull 5C3 Bulletin on Formulas and Calculations for Casing@ Tubing@ Drill Pipe and Line Pipe Properties
• API RP 16Q 
• API RP 2RD Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) (First Edition)
• GB/T 18658-2002 Charpy V reference test pieces for verification of pendulum-type impact testing machines (ISO 148-3:1998,Metallic materials--Charpy pendulum impact test--Part 3: Preparation and characterization of charpy V reference test pieces for verification of test
• GB/T 19190 Petroleum and natural gas industries.Drilling and production hoisting equipment*， 2013-12-31 Update
• GB/T 20174 Petroleum drilling and production equipment—Drill-through equipment*， 2019-03-25 Update
• GB/T 20972.1-2007 Petroleum and natural gas industries- Material for use in HS-containing environments in oil and gas production- Part 1: General principles for selection of cracking-resistant materials
• GB/T 20972.2-2008 Petroleum and natural gas industries.Materials for use in HS-containing environments in oil and gas production.Part 2:Cracking-resistant carbon and low alloy steels,and the use of cast irons
• GB/T 20972.3-2008 Petroleum and natural gas industries.Material for use in HS-containing environments in oil and gas production.Part 3:Cracking-resistant CRAs(corrosion-resistant alloys)and other alloys
• GB/T 22513-2008 Petroleum and natural gas industries.Drilling and production equipment.Wellhead and christmas tree equipment
• GB/T 228-2002 Metallic materials--Tensile testing at ambient temperature
• GB/T 230.1-2009 Metallic materials.Rockwell hardness test.Part 1:Test method(scales A、B、C、D、E、F、G、H、K、N、T)
• GB/T 231.1-2009 Metallic materials.Brinell hardness test.Part 1:Test method
• GB/T 531.1-2008 Rubber,vulcanized or thermoplastic.Determination of indentation hardness.Part 1:Duromerer method( Shore hardness)
• SY/T 5053.2 Oil and gas drilling equipment, drilling wellhead control equipment and diversion equipment control system*， 2020-10-23 Update
• SY/T 5170 Steel wire ropes for the petroleum and natural gas industries*， 2013-11-28 Update
• SY/T 5323-2004 Choke and Kill Systems
• SY/T 6917 Oil and gas drilling equipment offshore drilling riser joints*， 2021-11-16 Update

SY/T 6913-2012 history

• 2018 SY/T 6913-2018 Specification for offshore drilling riser equipment for oil and gas drilling equipment
• 2012 SY/T 6913-2012 Specification for marine drilling riser equipment