GB/T 4604.1-2012
Rolling bearings.Internal clearance.Part 1:Radial internal clearance for radial bearings (English Version)
- Standard No.
- GB/T 4604.1-2012
- Language
- Chinese, Available in English version
- Release Date
- 2012
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Latest
- GB/T 4604.1-2012
- Replace By
- LST EN 50288-3-1-2013
- Replace
- GB/T 4604-2006
- Scope
- This part of GB/T 4604 specifies the radial clearance values of the following types of radial bearings: ——radial contact groove type spherical shaft, except for outer spherical ball bearings; ——self-aligning ball bearings; ——cylindrical rollers Bearings; - needle roller bearings, except drawn cup needle roller bearings; - arc roller bearings; - spherical roller bearings. This part gives the radial clearance values of six types of bearings with cylindrical bores, and also gives the radial clearance values of self-aligning ball bearings with tapered bores, cylindrical roller bearings, long arc roller bearings and spherical roller bearings. Gap value. The radial clearance value of spherical insert ball bearings is specified in ISO 9628.
GB/T 4604.1-2012 Referenced Document
- ISO 1132-1:2000 Rolling bearings - Tolerances - Part 1: Terms and definitions
- ISO 15241 Rolling bearings — Symbols for physical quantities — Amendment 1*， 2020-01-08 Update
- ISO 5593 Rolling bearings — Vocabulary*， 2023-02-28 Update
- ISO 9628 Rolling bearings — Insert bearings and eccentric locking collars*， 2019-09-30 Update
GB/T 4604.1-2012 history
- 2012 GB/T 4604.1-2012 Rolling bearings.Internal clearance.Part 1:Radial internal clearance for radial bearings
- 2006 GB/T 4604-2006 Rolling bearings.Radial internal clearance
- 1993 GB/T 4604-1993 Rolling bearings-Radial internal clearance
GB/T 4604.1-2012 Rolling bearings.Internal clearance.Part 1:Radial internal clearance for radial bearings has been changed from GB/T 4604-2006 Rolling bearings.Radial internal clearance.
GB/T 4604.1-2012 Rolling bearings.Internal clearance.Part 1:Radial internal clearance for radial bearings was changed to LST EN 50288-3-1-2013 Multi-element metallic cables used in analogue and digital communication and control -- Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz - Horizontal and building backbone cables.
