GB/T 23615.2-2012
Accessorial material for architectural aluminum alloy profiles.Part 2:Material for thermal barrier polyurethane (English Version)
- Standard No.
- GB/T 23615.2-2012
- Language
- Chinese, Available in English version
- Release Date
- 2012
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Status
- 2018-05
- Replace By
- GB/T 23615.2-2017
- Latest
- GB/T 23615.2-2017
- Scope
- This part of GB/T 23615 specifies the requirements, test methods and inspection rules for isocyanate mixtures and polyol resins (hereinafter collectively referred to as raw rubber) used for polyurethane thermal insulation adhesive materials (hereinafter referred to as thermal insulation adhesive) for aluminum alloy building profiles And signs, packaging, transportation, storage and quality certificates and purchase orders (or contracts). This part applies to raw rubber converted into heat-insulating glue for aluminum alloy building profiles by chemical reaction method.
GB/T 23615.2-2012 Referenced Document
- GB 5237.1 Aluminium alloy extruded profiles for architecture.Part 1:Mill finish profiles
- GB 5237.4 Wrought aluminium alloy extruded profiles for architecture.Part 4:Powder coating profiles
- GB 5237.6-2012 Wrought aluminium alloy extruded profiles for architecture.Part 6:Thermal barrier profiles
- GB/T 10295 Thermal insulation.Determination of steady-state thermal resistance and related properties.Heat flow meter apparatus
- GB/T 1033.1-2008 Plastics.Methods for determining density of non-celluar plastics.Part1:Immersion method,liquid pyknometer method and titration method
- GB/T 1036 Test method for coefficient of linear thermal expansion of plastics between -30℃ and 30℃ with a vitreous silica dilatometer
- GB/T 1040.2-2006 Plastics. Determination of tensile properties. Part 2: Test conditions for moulding and extrusion plastics
- GB/T 1634.1-2004 Plastics-Determination of temperature of deflection under load-Part 1:General test method
- GB/T 16422.3 Plastics—Methods of exposure to laboratory light sources—Part 3: Fluorescent UV lamps*， 2022-04-15 Update
- GB/T 1843-2008 Determination of Izod Impact Strength of Plastics
- GB/T 2411-2008 Plastics and ebonite.Determination of indentation hardness by means of a durometer(shore hardness)
- GB/T 28289 Test methods for composite performances of aluminium alloy thermal barrier profiles
GB/T 23615.2-2012 history
- 2017 GB/T 23615.2-2017 Thermal barrier materials for architectural aluminum alloy profiles—Part 2: Thermal barrier polyurethane
- 2012 GB/T 23615.2-2012 Accessorial material for architectural aluminum alloy profiles.Part 2:Material for thermal barrier polyurethane
