SAE AMS5398G-2011 PDF

Scope: This specification covers a corrosion-resistant steel in the form of sand or centrifugal castings. These castings have been used typically for parts requiring corrosion resistance and strength up to 600 °F (316 °C), but usage is not limited to such applications. Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions.

SAE AMS5398G-2011 Referenced Document

ASTM A370-11 Standard Test Methods and Definitions for Mechanical Testing of Steel Products*， 2024-04-19 Update
ASTM E1417-05 Standard Practice for Liquid Penetrant Testing*， 2024-04-19 Update
ASTM E1444-05 Standard Practice for Magnetic Particle Testing*， 2024-04-19 Update
ASTM E446-10 Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness*， 2024-04-19 Update
SAE AMS2175-2003 Castings, Classification and Inspection of
SAE AMS2248 CHEMICAL CHECK ANALYSIS LIMITS Wrought Heat and Corrosion Resistant Steels
SAE AMS2633 ULTRASONIC INSPECTION Centrifugally-Cast, Corrosion-Resistant Steel Tubular Cylinders
SAE AMS2694 REPAIR WELDING OF AEROSPACE CASTINGS
SAE AMS2700-2000 Passivation of Corrosion Resistant Steels
SAE AMS2750 PYROMETRY
SAE AMS2804 IDENTIFICATION Castings
SAE ARP1110 MINIMIZING STRESS CORROSION CRACKING IN HEAT TREATABLE WROUGHT LOW ALLOY AND MARTENSITIC CORROSION RESISTANT STEELS

2023 SAE AMS5398H-2023 Steel, Corrosion-Resistant, Sand and Centrifugal Castings 16Cr - 4.1Ni - 0.22Cb (Nb) - 2.8Cu Solution Heat Treated
2018 SAE AMS5398H-2018 Steel@ Corrosion-Resistant@ Sand and Centrifugal Castings 16Cr - 4.1Ni - 0.22Cb (Nb) - 2.8Cu Solution Heat Treated (UNS J92200)
2011 SAE AMS5398G-2011 Steel, Corrosion Resistant, Sand and Centrifugal Castings 16Cr 4.1Ni 0.22Cb(Nb) 2.8Cu Solution Heat Treated
2006 SAE AMS5398F-2006 Steel, Corrosion Resistant, Sand and Centrifugal Castings 16Cr - 4.1Ni - 0.22(Cb + Ta) - 2.8Cu Solution Heat Treated UNS J92200
2000 SAE AMS5398E-2000 Steel, Corrosion Resistant, Sand and Centrifugal Castings 16Cr 4.1Ni 0.22(Cb + Ta) 2.8Cu Solution Heat Treated
1995 SAE AMS5398D-1995 STEEL CASTINGS, SAND AND CENTRIFUGAL, CORROSION RESISTANT 16Cr - 4.1Ni - 0.22(Cb + Ta) - 2.8Cu Solution Heat Treated, Precipitation Hardenable
1989 SAE AMS5398D-1989 Steel Castings@ Sand and Centrifugal@ Corrosion Resistant 16Cr - 4.1Ni - 0.22(Cb + Ta) - 2.8Cu Solution Heat Treated@ Precipitation Hardenable
1985 SAE AMS5398C-1985 Steel Castings@ Sand and Centrifugal@ Corrosion Resistant 16Cr - 4.1Ni - 0.22(cb + Ta) - 2.8Cu Solution Heat Treated (UNS J92170)
1978 SAE AMS5398B-1978 STEEL CASTINGS, SAND AND CENTRIFUGAL, CORROSION RESISTANT 16Cr - 4.1Ni - 0.22(Cb+Ta) - 2.8Cu
1961 SAE AMS5398A-1961 Steel Castings@ Sand and Centrifugal@ Corrosion Resistant 16Cr - 4.1Ni - 0.22 - 2.8Cu
1955 SAE AMS5398-1955 STEEL CASTINGS, SAND, CORROSION RESISTANT 17Cr - 4Ni - 4Cu