GB/T 15157.12-2011 Connectors for frequencies below 3 MHz for use with printed boards.Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits (English Version)
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Latest
GB/T 15157.12-2011
Scope
This Part specifies the dimensions, general requirements and test methods of sockets for dual in-line integrated circuits (see the provisions in IEC 60191-2:1966, such as A-50). Sockets include standard type (see Figure 6 and Figure 7) and small shell type (see Figure 8 and Figure 9). This section applies to sockets with through-board insertion terminals intended to be used in printed boards with a basic grid of 2.54 mm (0.1 in) in compliance with GB/T 1360-1998. Small shell receptacles are mountable side-to-side and end-to-end on a 2.54mm (0.1 in) grid. This section does not include burn-in sockets for testing.
GB/T 15157.12-2011 Referenced Document
GB/T 1031-2009 Geometrical Product Specifications(GPS).Surface texture:Profile method.Surface roughness parameters and their values
GB/T 5095.1-1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 1: General
GB/T 5095.2-1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests
GB/T 5095.3-1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 3: Current-carrying capacity tests
GB/T 5095.4-1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 4: Dynamic stress tests
GB/T 5095.5-1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 5: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests
GB/T 5095.6-1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 6: Climatic tests and soldering tests
GB/T 5095.7-1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 7: Mechanical operating tests and sealing tests
GB/T 5095.8-1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations
IEC 60191-2:1966 Mechanical standardization of semiconductor devices. Part 2 : Dimensions
GB/T 15157.12-2011 history
2011GB/T 15157.12-2011 Connectors for frequencies below 3 MHz for use with printed boards.Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits