DL/T 627-2012
Room temperature vulcanized silicon rubber anti-pollution coating for insulators (English Version)
- Standard No.
- DL/T 627-2012
- Language
- Chinese, Available in English version
- Release Date
- 2012
- Published By
- Professional Standard - Electricity
- Status
- 2019-05
- Replace By
- DL/T 627-2018
- Latest
- DL/T 627-2018
- Replace
- DL/T 627-2004
- Scope
- This standard specifies the basic technical requirements, inspection rules, packaging and storage, selection principles, acceptance, construction, operation and maintenance and technical management of room temperature curing silicone rubber anti-fouling flashover coatings (RTV for short) for insulators. This standard is applicable to RTV coatings used on insulators operating under AC system rated voltage higher than 1000V, ambient temperature -40℃~+40℃, and dirty conditions. This standard can be used as a reference for DC systems.
DL/T 627-2012 Referenced Document
- DL/T 859 Artificial contamination test of composite insulators for high-voltage AC systems
- DL/T 864 Application guide of composite insulators for AC overhand lines with a nominal voltage over 1000V
- GB/T 10707-2008 Rubber.Determination of the burning
- GB/T 13936 Rubber, vulcanized.Method for determination of strength properties of adhesive to metal in shear by tension loading*， 2014-12-22 Update
- GB/T 1408.1-2006 Electrical strength of insulating materials-Test methods-Part 1:Tests at power frequencies
- GB/T 1409-2006 Recommended methods for the determination of the permittivity and dielectric dissipation fator of electrical insulating materials at power,audio and radio frequencies including meter wavelengths
- GB/T 1692-2008 Vulcanized rubber.Determination of the insulation resistivity
- GB/T 16927.1 High-voltage test techniques.Part 1:General definitions and test requirements
- GB/T 16927.2 High-voltage test techniques.Part 2:Measuring systems*， 2013-02-07 Update
- GB/T 1720-1979 Method of test for adhesion of paint films
- GB/T 1723-1993 Determination of viscosity of coatings
- GB/T 1725-2007 Paints,varnishes and plastics.Determination of non-volatile-matter content
- GB/T 1768-2006 Paints and varnishes Determination of resistance to abrasion Rotating abrasive rubber wheel method
- GB/T 19519 Insulators for overhead lines.Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V.Definitions, test methods and acceptance criteria*， 2014-06-24 Update
- GB/T 20642 Impulse puncture tests in air on insulators for overhead lines
- GB/T 2900.19 Electrotechnical terminology—High-voltage test technique and insulation co-ordination*， 2022-10-14 Update
- GB/T 2900.5 Electrotechnical terminology.Electrical insulating solids,liquids and gases*， 2013-12-17 Update
- GB/T 2900.8 Electrotechnical terminology.Insulators
- GB/T 529-2008 Rubber,vulcanized or thermoplastic.Determination of tear strength(Trouser,angle and crescent test pieces)
- GB/T 6553-2003 Test methods for evaluating resistance to tracking and erosion of electrical insulating materials used under severe ambient conditions
- GB/T 6753.2 Paints and varnishes--Surface-drying test--Ballotini method
- GB/T 775.1-2006 Test method for insulators.Part 1: General test methods
- GB/T 775.2-2003 Test method for insulators Part 2: Electrical test methods
- GB/T 9274-1988 Paints and varnishes--Determination of resistance to liquids
DL/T 627-2012 history
- 2019 DL/T 627-2018 Room temperature vulcanized silicon rubber anti-pollution coating for insulators
- 2012 DL/T 627-2012 Room temperature vulcanized silicon rubber anti-pollution coating for insulators
- 2004 DL/T 627-2004 Room temperature vulcanized silicon rubber anti-pollution coating for insulators
