GB 50726-2011
Code for anticorrosive engineering construction of industrial equipment and pipeline (English Version)
Home
GB 50726-2011
Standard No.
GB 50726-2011
Language
Chinese,
Available in English version
Release Date
2011
Published By
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Status
Be replaced
Replace By
GB/T 50726-2023
Latest
GB/T 50726-2023
Scope
This specification is applicable to the construction of new, rebuilt and expanded industrial equipment and pipeline anti-corrosion linings and coatings based on steel and cast iron.
GB 50726-2011 Referenced Document
GB 1720
Determination of paint film adhesion
GB 50212
Code for construction of building anticorrosive engineering
*
,
2014-04-15 Update
GB 50235
Code for construction of industrial metallic piping engineering
GB/T 1031
Geometrical Product Specifications(GPS).Surface texture:Profile method.Surface roughness parameters and their values
GB/T 1040.1
Plastics—Determination of tensile properties—Part 1:General principles
*
,
2018-12-28 Update
GB/T 1447
Fiber-reinforced plastics composites---Determination of tensile properties
GB/T 1449
Fibre-reinforced plastic composites-Determination of flexural properties
GB/T 1451
Fiber-reinforced plastics composites---Determination of Charpy impact properties
GB/T 1470
Lead and lead-antimony alloy plate
*
,
2014-12-05 Update
GB/T 1721
Determination of appearance and transparency of varnishes,boiled oils and thinners
GB/T 1722
Estimation of colour of varnishes, boiled oils and thinners
GB/T 1723
Determination of viscosity of coatings
GB/T 1728
Determination of drying time of coating and putty films
*
,
2020-11-19 Update
GB/T 176
Cement Chemical Analysis Methods
*
,
2018-11-01 Update
GB/T 1768
Paints and varnishes Determination of resistance to abrasion Rotating abrasive rubber wheel method
GB/T 2572
Fiber-reiforced plastics composites-Determination for mean coefficient of linear expansion
GB/T 2895
Plastics.Polyester resin.Determination of partial acid value and total acid value
GB/T 2997
Test method for bulk density,apparent porosity and true porosity of dense shaped refractory products
*
,
2015-12-10 Update
GB/T 3001
Refractory products—Determination of modulus of rupture at ambient temperature
*
,
2017-09-07 Update
GB/T 3854
Test method for hardness of reinforced plastics by means of a Barcol impresser
*
,
2017-09-07 Update
GB/T 4209
Sodium silicate for industrial use
*
,
2022-07-11 Update
GB/T 50590
Technical code for anticorrosion engineering of vinyl ester resins
GB/T 5072
Test method for normal temperature compressive strength of refractory materials
*
,
2023-12-28 Update
GB/T 528
Rubber,vulcanized or thermoplastic.Determination of tensile stress-strain properties
GB/T 531.1
Rubber,vulcanized or thermoplastic.Determination of indentation hardness.Part 1:Duromerer method( Shore hardness)
GB/T 71
Slotted set screws with cone point
*
,
2018-12-28 Update
GB 50726-2011 history
2023
GB/T 50726-2023
Industrial equipment and pipeline anti-corrosion engineering technical standards
2011
GB 50726-2011
Code for anticorrosive engineering construction of industrial equipment and pipeline
Copyright ©2024 All Rights Reserved