This standard stipulates that the external dimensions conform to the diameter series 0, 2, and 3 specified in GB/T 276-1994, the nominal inner diameter is 3mm to 120mm, and the radial clearance conforms to the 0, 2, and 3 groups specified in GB/T 4604-2006. The vibration (speed) technical conditions of deep groove ball bearings with clearance (hereinafter referred to as bearings) and the vibration (speed) peak technical conditions corresponding to the V3 and V4 groups with an inner diameter of 3mm to 60mm. The V group specified in this standard is the basic requirement for general bearing vibration (speed), and the bearing is not marked with "V"; V1, V2, V3, and V4 groups are suitable for bearings with vibration (speed) requirements; VF3 and VF4 groups Suitable for bearings that require both vibration (speed) and vibration (speed) peak values. This standard applies to the production inspection and user acceptance of finished bearings by manufacturers.
JB/T 10187-2011 Referenced Document
GB/T 24610.1-2009 Rolling bearings.Measuring methods for vibration.Part 1:Fundamentals
GB/T 24610.2-2009 Rolling bearings.Measuring methods for vibration.Part 2:Radial ball bearings with cylindrical bore and outside surface
GB/T 276-1994 Rolling bearings--Deep groove ball bearings--Boundary dimensions
GB/T 2828.1-2003 Sampling procedures for inspection by attributes--Part 1: Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 4604-2006 Rolling bearings.Radial internal clearance
JB/T 2974-2004 Rolling bearings-Identification code-Supplemental regulations
JB/T 10187-2011 history
2011JB/T 10187-2011 Rolling bearings.Specifications for vibration (velocity) of deep groove ball bearings
2000JB/T 10187-2000 Rolling bearings.Deep groove ball bearing vibration(velocity).Specifications
JB/T 10187-2011 Rolling bearings.Specifications for vibration (velocity) of deep groove ball bearings was changed to AASHTO T 106M/T 106-2012 Standard Method of Test for Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or 2-in. Cube Specimens).