UL 181B-2005 UL Standard for Safety Closure Systems for Use with Flexible Air Ducts and Air Connectors Second Edition; Reprint with revisions through and including February 13, 2008.
1.1 These requirements cover pressure-sensitive tapes, mastic systems, and non-metallic mechanical fasteners for use as a part of the closure system of factory-made flexible air ducts or air connectors complying with the Standard for Factory-Made Air Ducts and Air Connectors, UL 181. 1.2 These requirements cover only pressure-sensitive tapes intended for use at the core to fitting attachment and at the outer moisture barrier. When used at the core to fitting attachment, a mechanical fastener shall be installed over the tape. The tape shall be employed at this location such that it does not disrupt the connection of the mechanical fastener. When tape is used at the outer moisture barrier, mechanical fasteners may or may not be employed. 1.3 These requirements cover only mastic systems intended to be used with joints of factory-made flexible non-metallic air ducts or air connectors which employ mechanical fasteners (see 2.4). The joints, without mastics, shall comply with the requirements of the Standard for Factory-Made Air Ducts and Air Connectors, UL 181. 1.4 Mastic closure systems are intended for use as an additional seal at the attachment of the flexible non-metallic air duct cores (or air connectors). The mastic shall be installed uniformly around the mating surface of the fitting collar (i.e. sleeves, elbows, and the like) and in such a manner that it does not disrupt the connection of the mechanical fastener around the core. 1.5 These requirements cover only non-metallic mechanical fasteners intended for use at the core to fitting attachment and at the outer moisture barrier of factory-made flexible non-metallic air ducts or air connectors. When these non-metallic fasteners are used, beaded fittings are required, and a maximum positive operating pressure shall be limited to 6 inch water column (1.5 kPa). Multiple lengths of fasteners may be joined to achieve longer length. This new edition of ANSI/UL 181B includes wording, organizational, miscellaneous editorial revisions, and the following changes in requirements: 1. Deletion of all requirements that pertain to certification issues.2. Clarification of sample selection practices for the Surface Burning Characteristics Tests in Part I - Pressure-Sensitive Tapes and in Part II - Mastic Closure Systems. 3. Revisions to the Temperature Tests in Part I - Pressure-Sensitive Tapes and in Part II - Mastic Closure Systems. 4. Revisions to the Peal Adhesion Test on Stainless Steel and to the Peal Adhesion Test on PVC coated Fabric in Part II - Mastic Closure Systems. 5. Revisions to the Mechanical Strength Test in Part III - Mechanical Fasteners for Use With Flexible Air Ducts. 6. Revisions to several conversions to reflect a statistically significant degree of accuracy for all metric measurements. 1.6 Pressure-sensitive tapes, mastic closure systems, and non-metallic mechanical fasteners are intended for use with flexible air ducts and air connectors installed in accordance with the Standard for the Installation of Air Conditioning and Ventilating Systems, NFPA 90A, and the Standard for the Installation of Warm Air Heating and Air Conditioning Systems, NFPA 90B; and/or Model codes.
UL 181B-2005 history
1970UL 181B-2021 Closure systems for use with flexible air ducts and air connectors
2017UL 181B BULLETIN-2017 UL Standard for Safety Closure Systems for Use with Flexible Air Ducts and Air Connectors (COMMENTS DUE: March 20@ 2017)
2014UL 181B BULLETIN-2014 UL Standard for Safety Closure Systems for Use with Flexible Air Ducts and Air Connectors (COMMENTS DUE: OCTOBER 30@ 2014)
2013UL 181B-2013 Closure systems for use with flexible air ducts and air connectors
2012UL 181B BULLETIN-2012 UL Standard for Safety Closure Systems for Use with Flexible Air Ducts and Air Connectors (COMMENTS DUE: October 08@ 2012)
2007UL 181B BULLETIN-2007 UL Standard for Safety Closure Systems for Use with Flexible Air Ducts and Air Connectors (COMMENTS DUE: October 01@ 2007)
2005UL 181B-2005 UL Standard for Safety Closure Systems for Use with Flexible Air Ducts and Air Connectors Second Edition; Reprint with revisions through and including February 13, 2008.