This British Standard makes recommendations for and gives guidance on health
and safety practices in shaft sinking and tunnel construction.
The standard includes health and safety recommendations that are also relevant
to cut-and-cover tunnelling, immersed tube tunnels and other forms of
underground construction as well as to the maintenance, renovation and repair
of shafts and tunnels. The recommendations are not intended to apply to the
construction of shafts or tunnels for the purpose of mineral extraction.
NOTE 1 The design, manufacture and use of plant and machinery are referred to
only where safety considerations are affected. Various European Standards relating
to the design of tunnel boring machines (TBMs) are currently under revision.
NOTE 2 Current legislation relating to occupational health and safety can be found
at www.hse.gov.uk.
BS 6164:2011 Referenced Document
BS 4363 Specification for distribution assemblies for reduced low voltage electricity supplies for construction and building sites
BS 4592-1 Industrial type flooring and stair treads – Part 1 : Metal open bar gratings – Specification
BS 4592-2 Industrial type flooring and stair treads – Part 2 : Expanded metal grating – Specification
BS 4592-3 Industrial type flooring and stair treads – Part 3 : Cold formed metal planks – Specification
BS 4592-5 Industrial type flooring and stair treads – Part 5 : Solid plates in metal and glass reinforced plastics (GRP) – Specification
BS 5306-1 Code of practice for fire extinguishing installations and equipment on premises – Part 1 : Hose reels and foam inlets
BS 5306-3 Fire extinguishing installations and equipment on premises. Commissioning and maintenance of portable fire extinguishers. Code of practice*, 2017-10-31 Update
BS 5306-8 Fire extinguishing installations and equipment on premises - Selection and positioning of portable fire extinguishers. Code of practice*, 2023-11-30 Update
BS 5395-3 Stairs, ladders and walkways — Part 3 : Code of practice for the design of industrial type stairs, permanent ladders and walkways
BS 5607 Code of practice for the safe use of explosives in the construction industry*, 2017-10-31 Update
BS 5911-1 Concrete pipes and ancillary concrete. Unreinforced and reinforced concrete pipes (including jacking pipes) and fittings with flexible joints (complementary to BS EN 1916:2002). Specification*, 2021-08-31 Update
BS 5930 Code of practice for ground investigations*, 2020-05-31 Update
BS 5975 Code of practice for temporary works procedures and the permissible stress design of falsework*, 2019-06-20 Update
BS 6657 Assessment of inadvertent initiation of bridge wire electro - explosive devices by radio - frequency radiation — Guide
BS 6724 Electric cables – Thermosetting insulated, armoured cables of rated voltages of 600 / 1000 V and 1900 / 3300 V for fixed installations, having low emission of smoke and corrosive gases when affected by fire – Specification
BS 7121-1 Code of practice for safe use of cranes. General*, 2016-01-31 Update
BS 7121-5 Code of practice for safe use of cranes. Tower cranes*, 2019-09-30 Update
BS 7375 Distribution of electricity on construction and demolition sites - Code of practice
BS 7430 Code of practice for protective earthing of electrical installations*, 2011-12-31 Update
BS 7671 Requirements for Electrical Installations. IET Wiring Regulations*, 2022-03-28 Update
BS 7835 Electric cables – Armoured cables with thermosetting insulation for rated voltages from 3.8 / 6.6 kV to 19 / 33 kV having low emission of smoke and corrosive gases when affected by fire – Requirements and test methods
BS EN 60079-1 Explosive atmospheres - Equipment protection by flameproof enclosures "d"*, 2024-02-29 Update
BS 6164:2011 history
2019BS 6164:2019 Health and safety in tunnelling in the construction industry. Code of practice
2011BS 6164:2011 Code of practice for health and safety in tunnelling in the construction industry
2001BS 6164:2001 Code of practice for safety in tunnelling in the construction industry