This standard specifies the conditions, items, requirements and rules for elevator installation and acceptance. This standard applies to electric drive traction elevators with a rated speed not greater than 6.0m/s and electric drive mandatory passenger elevators and cargo elevators with a rated speed not greater than 0.63m/s. For electric drive traction type passenger elevators and freight elevators with rated speed greater than 6.0m/s, this standard can be referred to, and the inapplicable part shall be determined through negotiation between the manufacturer and the customer. For special-purpose elevators such as fire elevators and elevators suitable for disabled persons, the acceptance content shall be adjusted according to the corresponding product standards. This standard does not apply to hydraulic lifts, utility lifts, freight-only lifts and home lifts.
GB/T 10060-2011 Referenced Document
GB 14048.4 Low-voltage switchgear and controlgear.Part 4-1:Contactors and motor-starters.Electromechanical contactors and motor-starters (Including motor protector)
GB 16895.3 Electrical installations of buildings--Part 5-54:Selection and erection of electrical equipment-Earthing arrangements,protective conductors and protective bonding conductors
GB 23821-2009 Safety of machinery-Safety distances to prevent hazard zones being reached by upper and lower limbs
GB 4208 Degrees of protection provided by enclosure(IP code)
GB 7588-2003 Safety rules for the construction and installation of electric lifts