GB/T 5923-2010
Test methods of fuel filter for automotive compression ignition engines (English Version)

Standard No.

GB/T 5923-2010

Language

Chinese, Available in English version

Release Date

2011

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Latest

GB/T 5923-2010

Replace By

AIA/NAS NAS61-2014

Replace

GB/T 5923-1986

Scope

This standard specifies the performance test methods for automotive diesel fuel filters, so that the test performance test results of the filters are comparable. This standard applies to automotive diesel fuel filters with a rated volume flow (or nominal volume flow) below 200L/h. It can be used as a reference for filters with a rated volume flow rate greater than 200L/h.

GB/T 5923-2010 Referenced Document

• ASTM D971-99a Standard Test Method for Interfacial Tension of Oil Against Water by the Ring Method
• GB 10327 Reference fuel specification for diesel engine performance test
• GB 11122 Diesel engine oils
• GB 253 Kerosine
• GB/T 14041.1-2007 Hydraulic fluid power.FiIter elements.Part 1: Verification of fabrication integrity and determination of the first bubble point
• ISO 11841-1:2000 Road vehicles and internal combustion engines - Filter vocabulary - Part 1: Definitions of filters and filter components
• ISO 11841-2:2000 Road vehicles and internal combustion engines - Filter vocabulary - Part 2: Definitions of characteristics of filters and their components
• ISO 12103-2:1997 Road vehicles - Test dust for filter evaluation - Part 2: Aluminium oxide test dust
• ISO 565 Test sieves; metal wire cloth, perforated metal plate and electroformed sheet; nominal sizes of openings
• ISO 760 Determination of water; Karl Fischer method (General method)
• ISO 8213:1986 Chemical products for industrial use; Sampling techniques; Solid chemical products in the form of particles varying from powders to coarse lumps
• SH/T 0111 synthetic spindle oil

GB/T 5923-2010 history

• 2011 GB/T 5923-2010 Test methods of fuel filter for automotive compression ignition engines
• 1986 GB/T 5923-1986 Test methods of fuel filters for automotive compression ignition engines

GB/T 5923-2010 Test methods of fuel filter for automotive compression ignition engines was changed to AIA/NAS NAS61-2014 SPACER, SLEEVE, NONMETALLIC, POLYAMIDE (NYLON), SCREW AND BOLT (Rev 3).