ISO 17709:2004
Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces

Standard No.

ISO 17709:2004

Release Date

2004

Published By

International Organization for Standardization (ISO)

Latest

ISO 17709:2004

Scope

This standard specifies the sampling location, preparation and environmental conditioning time for samples and specimens of footwear and footwear components. This standard applies to tests to evaluate performance according to end use. If there are no special provisions in the relevant test methods, this standard is a general requirement.

ISO 17709:2004 Referenced Document

• GB/T 3903.10 Footwear-Test methods for insoles--Dimensional stability*， 2005-09-15 Update
• GB/T 3903.11 Footwear-Test methods for insoles lining and insocks-Perspiration resistance*， 2005-09-15 Update
• GB/T 3903.12-2005 Footwear-Test methods for outsoles-Tear streagh*， 2005-09-15 Update
• GB/T 3903.13-2005 Footwear-Test. method for outsoles-Dimensional stability*， 2005-09-15 Update
• GB/T 3903.14-2005 Footwear-Test methods for outsoles-Needle tear strength*， 2005-09-15 Update
• GB/T 3903.22 Footwear.Test methods for outsoles.Tensile strength and elongation*， 2008-06-18 Update
• GB/T 3903.8 Footwear—Test methods for insoles—Delamination resistance*， 2022-10-14 Update
• GB/T 3903.9 Footwear—Test methods for insoles—Heel pin holding strength*， 2021-10-11 Update
• ISO 17693 Footwear - Test methods for uppers - Resistance to damage on lasting
• ISO 17694 Footwear - Test methods for uppers and lining - Flex resistance*， 2016-05-01 Update
• ISO 17695 Footwear - Test methods for uppers - Deformability
• ISO 17697:2003 Footwear - Test methods for uppers, lining and insocks - Seam strength
• ISO 17698 Footwear - Test methods for uppers - Delamination resistance*， 2016-05-01 Update
• ISO 17699 Footwear - Test methods for uppers and lining - Water vapour permeability and absorption
• ISO 17701 Footwear - Test methods for uppers, lining and insocks - Colour migration*， 2016-05-01 Update
• ISO 5404 Leather — Physical test methods — Determination of water resistance of heavy leathers*， 2011-12-01 Update
• QB/T 2882-2007 Footwear.Test methods for uppers, linings and insocks.Colour fastness to rubbing*， 2007-10-08 Update
• QB/T 2883-2007 Footwear.Test methods for uppers, linings and insocks.Tear strength*， 2007-10-08 Update
• QB/T 2884-2007 Footwear. Test methods for outsoles.Abrasion resistance*， 2007-10-08 Update
• QB/T 2885 Footwear.Test methods for outsoles.Flex resistance*， 2007-10-08 Update

ISO 17709:2004 history

• 2004 ISO 17709:2004 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces