JB/T 2902-2010 (English Version) PDF

Scope: This standard specifies the technical performance, technical requirements, test methods, acceptance rules and markings, packaging and storage of water-lubricated reciprocating piston high-pressure oxygen compressors (hereinafter referred to as oxygen compressors). This standard is applicable to bottle filling oxygen compressors with a suction pressure of (0.0005~0.0050) MPa, a rated exhaust pressure of (14.7~16.5) MPa, a nominal volume flow of not more than 200m/h, and a cylinder lubricated with distilled water.

JB/T 2902-2010 Referenced Document

GB 150-1998 Steel pressure vessels
GB 443-1989 Lubricating oils for total loss systems L-AN
GB/T 1174-1992 cast bearing metals
GB/T 13306-1991 Plates
GB/T 13384-2008 General specifications for packing of mechanical and electrical product
GB/T 13819-1992 Copper alloy castings
GB/T 3181-2008 Colour standard for paint film
GB/T 3853-1998 Displacement compressor--Acceptance tests
GB/T 3863-2008 Industrial oxygen
GB/T 4980-2003 Determination of sound level for noise emitted by displacement compressors
GB/T 7777-2003 Measurement and evaluation of mechanical vibration of displacement compressors
GB/T 9438-1999 Aluminium alloy castings
JB/T 6431-1992 Specification for grey iron castings of positive displacement compressor
JB/T 6896-2007 Surface cleanliness of air separation plants
JB/T 6908-2006 Steel forgings for displacement compressors
JB/T 9104-1999 The technical specification for spheroidal graphite iron castings of displacement compressors

2010 JB/T 2902-2010 Specification for water-lubricated reciprocating type high-pressure oxygen compressors
1993 JB/T 2902-1993 General reciprocating piston high-pressure oxygen compressor technical conditions