GB/T 23241-2009
Plastic pipes and fittings used for irrigation basic parameters and technical requirements (English Version)
- Standard No.
- GB/T 23241-2009
- Language
- Chinese, Available in English version
- Release Date
- 2009
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Status
- 2017-12
- Latest
- GB/T 23241-2009
- Scope
- This standard stipulates the basic parameters and technical conditions of extrusion-molded irrigation pipes (hereinafter referred to as pipes) and supporting pipe fittings that use polyvinyl chloride resin and polyethylene resin as the main raw materials. This standard is applicable to the water transmission and distribution network of projects such as low-pressure pipeline water delivery irrigation, sprinkler irrigation, micro sprinkler irrigation and drip irrigation.
GB/T 23241-2009 Referenced Document
- GB/T 10002.1-2006 Unplasticized poly (vinyl chloride) (PVC-U) pipes for water supply
- GB/T 10002.2-2003 Fittings made of unplasticized poly(vinyl chloride)(PVC-U)for water supply
- GB/T 1033-1986 Test method for density and relative density of plastics
- GB/T 13663-2000 Polyethylene pipes for water supply
- GB/T 14152-2001 Thermoplastics pipes-Determination of resistance to external blows-Round-the-clock method
- GB/T 1844.1 Plastics—Symbols and abbreviated terms—Part 1:Basic polymers and their special characteristics*， 2022-10-12 Update
- GB/T 2035 Terms and definitions for plastics
- GB/T 6111-2003 Thermoplastics pipes for the conveyance of fluids-Resistance to internal pressure--Test method
- GB/T 6671-2001 Thermoplastics pipes-Determination of longitudinal reversion
- GB/T 7306.1-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 1:Parallel internal and taper external threads
- GB/T 8801-2007 Test method for unplasticized polyvinyl chloride (PVC-U) fittings by falling
- GB/T 8802-2001 Thermoplastics pipes and fitting-Determination of vicat softening temperature
- GB/T 8803-2001 Injection-moulded unplasticized poly(vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C),acrylonitrile butadiene-styrene(ABS)and acrylonitrile-styrene-acrylester(ASA)fittings Hot oven test method
- GB/T 8804.2-2003 Thermoplastic pipes--Determination of tensile properties--Part 2: Pipes made of unplasticized poly(vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C)and high-impact poly(vinyl chloride)(PVC-HI)
- GB/T 9113.1-2000 Intergral steel pipe flanges with flat face or raised face
- GB/T 9647-2003 Thermoplastics pipes--Determination of ring stiffness
GB/T 23241-2009 history
- 2009 GB/T 23241-2009 Plastic pipes and fittings used for irrigation basic parameters and technical requirements
