GB/T 9332-2008
Electrical installations in ships.Cables for control and instrumentation circuits 150/250V(300V) (English Version)

Standard No.

GB/T 9332-2008

Language

Chinese, Available in English version

Release Date

2008

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Latest

GB/T 9332-2008

Replace

GB/T 9332.1-1988

Scope

This standard is applicable to extruded insulated cables fixedly laid with rated voltage 150/250V (300V) (see Chapter 4). It is mainly used for shielded and unshielded cables for control and instrument circuits of ships and offshore devices. For the various types of cables listed in Chapter 8, unless otherwise specified in this standard, the structural requirements and test methods shall comply with the provisions of GB/T 20637-2006. Purposes of this standard: ——Aim to standardize the cables selected and installed according to the requirements of GB/T 13029.1-2003, so as to ensure their safety and reliability; ——Specify the production requirements of cables and the characteristics directly or indirectly related to safety; — It specifies the test method for checking whether the product meets the requirements of this standard.

GB/T 9332-2008 Referenced Document

• GB/T 1.1 Directives for standardization—Part 1: Rules for the structure and drafting of standardizing documents*， 2020-03-31 Update
• GB/T 1.2 Directives for standardization—Part 2:Drafting rules of standardizing documents based on ISO/IEC standardizing documents*， 2020-11-19 Update
• GB/T 1.22 Directives for work of standardization Unit2:Methodology for the development of standards Part22:Rule of "reference to standards"
• GB/T 1.4 Standardization Work Guidelines Chemical Analysis Method Standard Compilation Provisions
• GB/T 1.6 Regulations on Compilation of Terminology Standards in Standardization Work Guidelines
• GB/T 13029.1-2003 Electrical installations in ships-Choice and installation of cables for low-voltage power systems
• GB/T 17651.1-1998 Measurement of smoke density of cables burning under defined conditions. Part 1: Test apparatus
• GB/T 17651.2-1998 Measurement of smoke density of cables burning under defined conditions. Part 2: Test procedure and requirements
• GB/T 2951.11-2008 Common test method for insulating and sheathing materials of electric and optical cables.Part 11:Methods for general application.Measurement of thickness and overall dimensions.Tests for determining the mechanical properties
• GB/T 2951.12-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part 12:Methods for general application.Thermal ageing methods
• GB/T 2951.13-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part13:Methods for general application.Measurement for determining the density.Water absorption tests.Shrinkage test
• GB/T 2951.14-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part 14:Methods for general application-Test at low temperature
• GB/T 2951.21-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part21:Methods specific to elastomeric compounds.Ozone resistance,hot set and mineral oil immersion tests
• GB/T 2951.31-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part31:Methods specific to PVC compounds.Pressure test at high temperature.Test for resistance to cracking
• GB/T 2951.32-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part32:Methods specific to PVC compounds.Loss of mass test.Thermal stability test
• GB/T 2951.41-2008 Common test method for insulating and sheathing materials of electric and optical cables.Part 41:Methods specific to polyethylene and polypropylene compounds.Resistance to environmental stress cracking.Measurement of the melt flow index.Carbon black and/o
• GB/T 2951.42-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part 42:Methods specific to polyethylene and polypropylene compounds.Tensile strength and elongation at break after conditioning at elevated temperature.Wrapping tes
• GB/T 2951.51-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part51:Methods specific to filling compounds.Drop point.Separation of oil.Lower temperature brittleness.Total acid number.Absence of corrosive components.Permittivit
• GB/T 9331-2008 Single and multicore non-radial field power cables with extruded solid insulation for rated voltages 1kV and 3kV

GB/T 9332-2008 history

• 2008 GB/T 9332-2008 Electrical installations in ships.Cables for control and instrumentation circuits 150/250V(300V)
• 1988 GB/T 9332.1-1988 Shipboard control cables--General