This standard specifies the classification, requirements, test methods, inspection rules, safety, sanitation and environmental protection and acceptance requirements for anti-corrosion coatings on steel structures of highway bridges. This standard is applicable to the anti-corrosion coating of steel structures of highway bridges. The anti-corrosion coating of bridge steel structures in other application areas or steel structures under similar conditions can also be implemented with reference.
JT/T 722-2008 Referenced Document
GB 6514 Safety code of practice for coating—Safety and ventilation for coating process*, 2023-12-28 Update
GB 7691 Safety code for painting--Safety management general rule
GB 7692 Safety code for painting.Safety、ventilation and air clean-up for pretreatment process of painting*, 2012-07-31 Update
GB/T 10610 Geometrical Product Specifications(GPS)Surface texture:Profile method.Rules and procedures for the assessment of surface texture*, 2009-03-16 Update
GB/T 13288 The assessment of profile grades of steel surface before application of paint and related products.Comparator
GB/T 13452.2 Paints and varnishes.Determination of film thickness
GB/T 1725 Paints,varnishes and plastics.Determination of non-volatile-matter content
GB/T 1728 Determination of drying time of coating and putty films*, 2020-11-19 Update
GB/T 1730 Paints and varnishes.pendulum damping test
GB/T 1733 Determination of resistance to water of films
GB/T 1735 Paints and varnishes.Determination of heat resistance*, 2009-06-02 Update
GB/T 1766 Paints and varnishes.Rating schemes of degradation of coats
GB/T 1768 Paints and varnishes Determination of resistance to abrasion Rotating abrasive rubber wheel method
GB/T 1771 Paints and varnishes.Determination of resistance to neutral salt spray(fog)
GB/T 1865 Paints and varnishes.Artificial weathering and exposure to artificial radiation.Exposure to filtered xenon-arc radiation*, 2009-06-02 Update
GB/T 5210 Paints and varnishes. Pull-off test for adhesion
GB/T 6742 Paints and varnishes.Bend test(cylindrical mandrel)