ASTM D6237-03
Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)

Standard No.
ASTM D6237-03
Release Date
2003
Published By
American Society for Testing and Materials (ASTM)
Status
Replace By
ASTM D6237-09
Latest
ASTM D6237-19
Scope

This guide is intended as a reference for those concerned with the inspection of thin- or thick-film coating application to concrete and masonry substrates. It does not cover the application of cement-type coatings. A checklist is included as Appendix X1.1. Many of the details covered may be in a specification for a particular project. A specification for coating projects should include the coatings to be used.

1.1 This guide is intended as an information aid to painting inspectors in carrying out the task efficiently. It includes the key elements of surface preparation, coatings application, and final approval for both field and shop work. The items should be selected that are pertinent to a particular job.

Note 18212;For additional helpful information, refer to the following documents:

Manual of Concrete Practice ACI 515R American Concrete Institute

Manual of Coating Work for Light Water Nuclear Power Plant Primary Containment and Other Safety Related Facilities

C 811 Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings

SSPC-PA Guide 3 - A Guide to Safety in Paint Application

Steel Structures Painting Manual Vol. 1- Good Painting Practices

Steel Structures Painting Manual Vol. 2 - Systems and Specifications

Manufacturers Specifications and Instructions (made available to the inspector for reference to special requirements for proper application)

Material Safety Data Sheets (needed to insure that personnel take necessary precautions in handling hazardous materials) Available from Materials manufacturer.

1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whomever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D6237-03 history

  • 2019 ASTM D6237-19 Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)
  • 2009 ASTM D6237-09(2015) Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)
  • 2009 ASTM D6237-09 Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)
  • 2003 ASTM D6237-03 Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)
  • 1998 ASTM D6237-98 Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)



Copyright ©2024 All Rights Reserved