ASTM E1219-99
Standard Test Method for Fluorescent Liquid Penetrant Examination Using the Solvent-Removable Process

Standard No.
ASTM E1219-99
Release Date
1999
Published By
American Society for Testing and Materials (ASTM)
Status
Replace By
ASTM E1219-05
Latest
ASTM E1219-21
Scope

1.1 This test method covers procedures for fluorescent penetrant examination utilizing the solvent-removable process. It is a nondestructive testing method for detecting discontinuities that are open to the surface, such as cracks, seams, laps, cold shuts, laminations, isolated porosity, through leaks, or lack of fusion and is applicable to inprocess, final, and maintenance examination. It can be effectively used in the examination of nonporous, metallic materials, both ferrous and nonferrous, and of nonmetallic materials such as glazed or fully densified ceramics and certain nonporous plastics and glass.

1.2 This test method also provides a reference:

1.2.1 By which a fluorescent penetrant examination solvent-removable process recommended or required by individual organizations can be reviewed to ascertain its applicability and completeness.

1.2.2 For use in the preparation of process specifications dealing with the fluorescent solvent-removable liquid penetrant examination of materials and parts. Agreement by the purchaser and the manufacturer regarding specific techniques is strongly recommended.

1.2.3 For use in the organization of the facilities and personnel concerned with the liquid penetrant examination.

1.3 This test method does not indicate or suggest standards for evaluation of the indications obtained. It should be noted, however, that after indications have been produced, they must be interpreted or classified and then evaluated. For this purpose there must be a separate code or specification or a specific agreement to define the type, size, location, and direction of indications considered acceptable, and those considered unacceptable.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Notes 5, 12, and 16.

ASTM E1219-99 history

  • 2021 ASTM E1219-21 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process
  • 2016 ASTM E1219-16 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process
  • 2010 ASTM E1219-10 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process
  • 2005 ASTM E1219-05 Standard Test Method for Fluorescent Liquid Penetrant Examination Using the Solvent-Removable Process
  • 1999 ASTM E1219-99 Standard Test Method for Fluorescent Liquid Penetrant Examination Using the Solvent-Removable Process



Copyright ©2024 All Rights Reserved