ASTM E1219-21
Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process

Standard No.

ASTM E1219-21

Release Date

2021

Published By

American Society for Testing and Materials (ASTM)

Latest

ASTM E1219-21

Scope

1.1 This practice2 covers procedures for fluorescent penetrant examination utilizing the solvent-removable process. It is a nondestructive testing method for detecting discontinuities that are open to the surface, such as cracks, seams, laps, cold shuts, laminations, isolated porosity, through leaks, or lack of fusion and is applicable to in-process, final, and maintenance examination. It can be effectively used in the examination of nonporous, metallic materials, both ferrous and nonferrous, and of nonmetallic materials such as glazed or fully densified ceramics and certain nonporous plastics and glass. 1.2 This practice also provides a reference: 1.2.1 By which a fluorescent penetrant examination solventremovable process recommended or required by individual organizations can be reviewed to ascertain its applicability and completeness. 1.2.2 For use in the preparation of process specifications dealing with the fluorescent solvent-removable liquid penetrant examination of materials and parts. Agreement by the purchaser and the manufacturer regarding specific techniques is strongly recommended. 1.2.3 For use in the organization of the facilities and personnel concerned with the liquid penetrant examination. 1.3 This practice does not indicate or suggest standards for evaluation of the indications obtained. It should be pointed out, however, that indications must be interpreted or classified and then evaluated. For this purpose there must be a separate code or specification or a specific agreement to define the type, size, location, and direction of indications considered acceptable, and those considered unacceptable. 1.3.1 The user is encouraged to use materials and processing parameters necessary to detect conditions of a type or severity which could affect the evaluation of the product. 1.4 All areas of this document may be open to agreement between the cognizant engineering organization and the supplier, or specific direction from the cognizant engineering organization. 1.5 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM E1219-21 Referenced Document

• ASTM D129 Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
• ASTM D1552 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
• ASTM D516 Standard Test Method for Sulfate Ion in Water
• ASTM D808 Standard Test Method for Chlorine in New and Used Petroleum Products (Bomb Method)
• ASTM E1316 Standard Terminology for Nondestructive Examinations*， 2024-02-01 Update
• ASTM E165/E165M Standard Practice for Liquid Penetrant Testing for General Industry
• ASTM E3022 Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing*， 2024-04-21 Update
• ASTM E433 Standard Reference Photographs for Liquid Penetrant Inspection*， 2023-06-01 Update
• ASTM E543 Standard Practice for Agencies Performing Nondestructive Testing
• ISO 9712 Non-destructive testing — Qualification and certification of NDT personnel*， 2021-12-21 Update
• NAS410 NAS CERTIFICATION & QUALIFICATION OF NONDESTRUCTIVE TEST PERSONNEL (Rev 4)

ASTM E1219-21 history

• 2021 ASTM E1219-21 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process
• 2016 ASTM E1219-16 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process
• 2010 ASTM E1219-10 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process
• 2005 ASTM E1219-05 Standard Test Method for Fluorescent Liquid Penetrant Examination Using the Solvent-Removable Process
• 1999 ASTM E1219-99 Standard Test Method for Fluorescent Liquid Penetrant Examination Using the Solvent-Removable Process