DIN EN ISO 16151:2008
Corrosion of metals and alloys - Accelerated cyclic tests with exposure to acidified salt spray, "dry" and "wet" conditions (ISO 16151:2005); German version EN ISO 16151:2008

Standard No.

DIN EN ISO 16151:2008

Release Date

2008

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN EN ISO 16151:2018

DIN EN ISO 16151:2017

Latest

DIN EN ISO 16151:2018-10

Replace

DIN EN ISO 16151:2007

Scope

This International Standard specifies two accelerated corrosion-test procedures, Methods A and B, for the comparative evaluation of metallic materials with or without permanent corrosion protection or temporary corrosion protection in outdoor salt/acid rain environments. It also specifies the apparatus used. The two tests involve cyclic exposure of the specimens to acidified salt spray, "dry" and "wet" conditions. The particular advantages of the two tests over conventional accelerated tests, such as the neutral salt spray test (NSS) as specified in ISO 9227 lie in their better ability to reproduce the corrosion that occurs in outdoor salt/acid rain environments. They are also useful for evaluating cosmetic corrosion. Method A applies to -- metals and their alloys, -- metallic coatings (cathodic), -- anodic oxide coatings, and -- organic coatings on metallic materials. Method B applies to -- steel coated with anodic coatings, and -- steel coated with anodic coatings covered with conversion coatings.

DIN EN ISO 16151:2008 Referenced Document

• ISO 10289:1999 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates - Rating of test specimens and manufactured articles subjected to corrosion tests
• ISO 11130:1999 Corrosion of metals and alloys - Alternate immersion test in salt solution
• ISO 4628-1:2003 Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system
• ISO 4628-2:2003 Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
• ISO 4628-3:2003 Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
• ISO 4628-4:2003 Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking
• ISO 4628-5:2003 Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking
• ISO 8407:1991 Corrosion of metals and alloys; removal of corrosion products from corrosion test specimens
• ISO 8993:1989 Anodized aluminium and aluminium alloys; rating system for the evaluation of pitting corrosion; chart method
• ISO 9227:1990 Corrosion tests in artificial atmospheres; salt spray tests

DIN EN ISO 16151:2008 history

• 2018 DIN EN ISO 16151:2018-10 Corrosion of metals and alloys - Accelerated cyclic test with exposure to acidified salt spray, dry and wet conditions (ISO 16151:2018); German version EN ISO 16151:2018
• 2018 DIN EN ISO 16151:2018 Corrosion of metals and alloys - Accelerated cyclic test with exposure to acidified salt spray, dry and wet conditions (ISO 16151:2018); German version EN ISO 16151:2018
• 2008 DIN EN ISO 16151:2008 Corrosion of metals and alloys - Accelerated cyclic tests with exposure to acidified salt spray, "dry" and "wet" conditions (ISO 16151:2005); German version EN ISO 16151:2008
• 0000 DIN EN ISO 16151:2007