This standard specifies the terms and definitions, models and markings of copper-aluminum composite column wing-shaped radiators (hereinafter referred to as radiators) which are formed by expansion joints of copper pipe columns and aluminum wing tubes, and then welded together with upper and lower copper pipe headers. , requirements, test methods, inspection rules, marking, packaging, transportation and storage, etc. This standard applies to radiators using hot water as the heating medium in industrial and civil buildings. The working pressure of the radiator is 1.0MPa; the temperature of the heating medium is not higher than 95°C; the pH of the heating medium water is pH=7~12, and the chloride ions (CL) and sulfate (SO) are not more than 100mg/L respectively. Other indicators should be based on the water supply of the heating system and comply with the provisions of the GB 1576 and HG/T 3729 standards on the water supply of the heating system.
GB/T 13754 Test methods of thermal output of heating radiators*, 2017-05-31 Update
GB/T 1720 Circle-drawing test of coating films*, 2020-11-19 Update
GB/T 1732 Determination of impact resistance of coating films*, 2020-11-19 Update
GB/T 17791 "Seamless copper and copper alloys tube for air conditioner and refrigeration equipment"*, 2017-07-12 Update
GB/T 2828.1 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)*, 2013-02-15 Update
GB/T 3190 Chemical composition of wrought aluminium and aluminium alloys*, 2020-03-31 Update
GB/T 7307 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads
GB/T 985 Basic forms and sizes of weld grooves for gas welding manual arc welding and gas--Shielded arc welding
HG/T 3729 Specification for radio-frequency(RF) type physical field treatment equipment of water
HGJ 223 Technical specification for welding copper and copper alloys (explanation)
JG/T 6 Coefficient, thread and fittings of heating radiator