DL/T 533-2007
Technical specification for power load management terminal unit (English Version)

Standard No.

DL/T 533-2007

Language

Chinese, Available in English version

Release Date

2007

Published By

Professional Standard - Electricity

Latest

DL/T 533-2007

Replace

DL/T 533-1993

Scope

This standard specifies the technical requirements, test methods and inspection rules for power load management terminals. This standard applies to the manufacturing, inspection, use and acceptance of power load management terminals.

DL/T 533-2007 Referenced Document

• DL/T 535 Power load management system data transmission protocol*， 2009-12-01 Update
• DL/T 597-1996 Specification of low-voltage reactive compensation controls for order
• DL/T 645 Multi-function watt-hour meter communication protocol*， 2007-12-03 Update
• DL/T 790.31-2001 Distribution automation using distribution line carrier systems- Part 3: Mains signalling requirements - Section 1: Frequency bands and output levels
• GB/T 12192-1990 Methods of measurement for radio transmitters employing F3E emission used in the mobile services
• GB/T 12193 Methods of measurement for receivers employing F3E or G3E emission used in the mobile services*， 2017-12-29 Update
• GB/T 16611-1996 Generic specification for data transceiver
• GB/T 16935.1-1997 Insulation coordination for eguipment within low-voltage systems. Part 1: Principles, requirements and tests
• GB/T 17626.2 Electromagnetic compatibility.Testing and measurement techniques.Electrostatic discharge immunity test*， 2018-06-07 Update
• GB/T 17626.3 Electromagnetic compatibility test and measurement technology Part 3: Radio frequency electromagnetic field radiation immunity test*， 2023-12-28 Update
• GB/T 2421 Environmental testing—General and guidance*， 2020-06-02 Update
• GB/T 2423.1 Environmental testing for electric and electronic products.Part 2:Test methods.Tests A:Cold*， 2008-12-30 Update
• GB/T 2423.10 Environmental testing—Part 2:Test methods—Test Fc:Vibration(sinusoidal)*， 2019-06-04 Update
• GB/T 2423.2 Environmental testing for electric and electronic products.Part 2:Test methods.Tests B:Dry heat*， 2008-12-30 Update
• GB/T 2423.9 Environmental testing for electric and electronic products Part 2: Test methods Test Cb: Damp heat,steady state,primarily for equipment
• GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
• GB/T 4208-1993 Classification of enclosure protection class
• GB/T 5169.11 Fire hazard testing for electric and electronic products.Part 11:Glowing/hot-wire based test methods.Glow-wire flammability test method for end-products(GWEPT)*， 2017-12-29 Update
• JB/T 6214-1992 Guideline for reliability validation test and determination test (exponential distribution) for instrumentation

DL/T 533-2007 history

• 2007 DL/T 533-2007 Technical specification for power load management terminal unit
• 1994 DL/T 533-1993 Radio Load Control Two-way Terminal Technical Conditions