ISO/TS 21268-2:2007 Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 2: Batch test using a liquid to solid ratio of 10 l/kg dry matter
International Organization for Standardization (ISO)
Latest
ISO/TS 21268-2:2007
Scope
This part of ISO/TS 21268 specifies a test providing information on leaching of soil and soil materials under
the experimental conditions specified hereafter, and particularly at a liquid to solid ratio of 10 l/kg dry matter. It
applies to soil and soil material with a particle size less than or equal to 4 mm.
This part of ISO/TS 21268 has been developed to measure the release of inorganic and organic constituents
from soil and soil material and the ecotoxicological effects of eluates with respect to micro-organisms, fauna
and flora. The test is not suitable for constituents that are volatile under ambient conditions. For
ecotoxicological testing, see ISO 15799.
NOTE 1 Volatile organic constituents include the low-molecular-weight components in mixtures such as mineral oil.
NOTE 2 It is not always possible to optimise test conditions simultaneously for inorganic and organic constituents and
optimum test conditions may also vary between different groups of organic constituents. Test requirements for organic
constituents are generally more stringent than those for inorganic constituents. The test conditions suitable for measuring
the release of organic constituents will generally also be applicable to inorganic constituents.
NOTE 3 For ecotoxicological testing, eluates representing the release of both inorganic and organic contaminants are
needed. In this document, ecotoxicological testing is also meant to include genotoxicological testing.
The test procedure specified in this part of ISO/TS 21268 produces eluates, which are subsequently
characterised by existing physical, chemical and ecotoxicological standard methods.
This test is mainly aimed at being used for routine and control purposes, and it cannot be used alone to
describe all leaching properties of a soil. Additional leaching tests are needed for that extended goal. This part
of ISO/TS 21268 does not address issues related to health and safety. It only determines the leaching
properties as outlined in Clause 4.
ISO/TS 21268-2:2007 Referenced Document
ISO 10381-1 Soil quality - Sampling - Part 1: Guidance on the design of sampling programmes
ISO 10381-2 Soil quality - Sampling - Part 2: Guidance on sampling techniques
ISO 10381-3 Soil quality - Sampling - Part 3: Guidance on safety
ISO 10381-4 Soil quality - Sampling - Part 4: Guidance on the procedure for investigation of natural, near-natural and cultivated sites
ISO 10381-5 Soil quality - Sampling - Part 5: Guidance on the procedure for the investigation of urban and industrial sites with regard to soil contamination
ISO 10381-6 Soil quality - Sampling - Part 6: Guidance on the collection, handling and storage of soil under aerobic conditions for the assessment of microbiological processes, biomass and diversity in the laboratory*, 2009-03-01 Update
ISO 10523 Water quality - Determination of pH*, 2008-12-01 Update
ISO 11465 Soil quality; determination of dry matter and water content on a mass basis; gravimetric method; technical corrigendum 1
ISO 3696 Water for analytical laboratory use; Specification and test methods
ISO 7027 Water quality - Determination of turbidity
ISO/TS 21268-2:2007 history
2007ISO/TS 21268-2:2007 Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 2: Batch test using a liquid to solid ratio of 10 l/kg dry matter