This European Standard specifies the test method for cables designed to have intrinsic resistance to fire
and intended for use as emergency circuits for alarm, lighting and communication purposes.
This standard is applicable to cables, for emergency circuits, of rated voltage not exceeding 600/1 000 V,
including those of rated voltage below 80 V, and for emergency circuit optical cables.
NOTE Although test procedures for electronic data and communication cables and optical fibre cables are given in
this document, these areas are under active development and the given procedures may be subject to future review.
This standard is not applicable to cables intended for use in public telecommunications networks.
The test method is limited to cables with an overall diameter not exceeding 20 mm.
The test method, which is based on the direct impingement of flame from a propane burner giving a
constant temperature attack of a notional 842 °C, can be used for cables for emergency circuits required to
comply with Subclause 4.3.1.4.6 (a) of the Interpretative Document for Essential Requirement No. 2 'Safety
in Case of Fire' (94/C62/01) of the Construction Products Directive (89/106/EEC). In such cases the test
method only applies, for metallic conductor cables, to those with conductor sizes up to and including
2,5 mm2. For optical cables, only the 20 mm diameter limit applies.
This standard includes (Annex D) a means of linking the measured survival time to the fire resistance
classification for these cables, as required by Subclause 4.3.1.4.6(a) of 94/C62/01.
The standard also includes (Annex E) a means of applying a water spray to the cable during the test.
Although there is no requirement under the Construction Products Directive for cables to withstand water
spray when assessing resistance to fire, such a requirement may be a feature of particular product
standards.
BS EN 50200:2006 Referenced Document
EN 60584-1 Thermocouples - Part 1: EMF specifications and tolerances*, 2024-04-18 Update
EN 60695-4 Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products*, 2012-08-01 Update
BS EN 50200:2006 history
2015BS EN 50200:2015 Method of test for resistance to fire of unprotected small cables for use in emergency circuits
2006BS EN 50200:2006 Method of test for resistance to fire of unprotected small cables for use in emergency circuits
2003BS 8434-1:2003 Methods of test for assessment of the fire integrity of electric cables - Test for unprotected small cables for use in emergency circuits - BS EN 50200 with addition of water spray