ISO 6185-2:2001
Inflatable boats - Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive

Standard No.
ISO 6185-2:2001
Release Date
2001
Published By
International Organization for Standardization (ISO)
Latest
ISO 6185-2:2001
Scope
This part of GB/T 20897 specifies the minimum safety requirements for the design, materials, manufacturing and testing of inflatable boats (including rigid inflatable boats) with a total length of less than 8 m and a minimum buoyancy of 1800 N. This section applies to the following types of inflatable boats intended to operate within the ambient temperature range of -15°C to 60°C:  ——Type V: Inflatable boats that can obtain rated engine power of 4.5 kW to 15 kW;  ——Type Vl : A boat propelled by a sail with an area greater than 6 m (see Appendix A). Note: For boats with a rated power less than 4.5 kW, please refer to Part 1 of GB/T 20897. For boats with a rated power greater than 15 kW, please refer to ISO 6185-3. This section does not include single-cabin boats and boats with a buoyancy greater than 12 kN and an engine power greater than 4.5 kW, made of unsupported materials, and is not applicable to water sports boats and inflatable life rafts.

ISO 6185-2:2001 Referenced Document

  • GB/T 11700 Small craft-Marine propulsion reciprocating internal combustion engines-Power measurements and declarations *2009-03-09 Update
  • GB/T 18815 Small craft, engine-driven.Field of vision from helm position*2013-11-27 Update
  • GB/T 19314.1 Small craft--Hull construction and scantlings--Part 1: Materials: Thermosetting resins,glass-fibre reinforcement,reference laminate*2003-09-29 Update
  • GB/T 19318 Small craft--Hydraulic steering systems*2003-09-29 Update
  • ISO 15652:2003 Small craft - Remote steering systems for inboard mini jet boats*2003-11-01 Update
  • ISO 1817:2005 Rubber, vulcanized - Determination of the effect of liquids*2005-10-01 Update
  • ISO 2411:2000 Rubber- or plastics-coated fabrics - Determination of coating adhesion
  • ISO 3011:1997 Rubber- or plastics-coated fabrics - Determination of resistance to ozone cracking under static conditions
  • ISO 4646:1989 Rubber- or plastics-coated fabrics; low-temperature impact test
  • ISO 4674:1977 Fabrics coated with rubber or plastics; Determination of tear resistance

ISO 6185-2:2001 history

  • 2001 ISO 6185-2:2001 Inflatable boats - Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive
Inflatable boats - Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive



Copyright ©2024 All Rights Reserved