SAE AMS5529G-2003
Steel, Corrosion Resistant, Sheet and Strip 17Cr 7.1Ni 1.1Al Solution Heat Treated and Cold Rolled, Precipitation Hardenable 0.0015 to 0.050 Inch (0.038 to 1.27 mm) Nominal Thickness

Standard No.

SAE AMS5529G-2003

Release Date

2003

Published By

Society of Automotive Engineers (SAE)

Status

Withdraw

Replace By

SAE AMS5529H-2008

Latest

SAE AMS5529K-2019

Scope

This specification covers a corrosion-resistant steel in the form of sheet and strip 0.0015 to 0.050 inch (0.038 to 1.27 mm) in nominal thickness. These products have been used typically for parts requiring corrosion resistance and high strength up to 600 degrees F (316 degrees C), but usage is not limited to such applications. Strength of these cold-worked products will be impaired if parts require welding during fabrication. Certain design and processing procedures may causes these products to become subject to stress-corrosion cracking; SAE ARP 1110 recommends practices to minimize such conditions.

SAE AMS5529G-2003 history

• 1970 SAE AMS5529K-2019 STEEL SHEET AND STRIP, CORROSION RESISTANT 17Cr - 7Ni - 1Al Precipitation Hardening - 200,000 psi
• 2012 SAE AMS5529J-2012 Steel, Corrosion Resistant, Sheet and Strip 17Cr 7.1Ni 1.1Al Solution Heat Treated and Cold Rolled, Precipitation Hardenable 0.0015 to 0.100 Inch (0.038 to 2.54 mm) Nominal Thickness
• 2011 SAE AMS5529C-2011 STEEL SHEET AND STRIP CORROSION RESISTANT 17 Cr - 7Ni - 1.1Al Solution Heat Treated and Cold Rolled Precipitation Hardenable 0.0015 - 0.050 Inch (0.038 - 1.27 mm) Nominal Thickness
• 2008 SAE AMS5529H-2008 Steel, Corrosion Resistant, Sheet and Strip 17Cr 7.1Ni 1.1Al Solution Heat Treated and Cold Rolled, Precipitation Hardenable 0.0015 to 0.050 Inch (0.038 to 1.27 mm) Nominal Thickness
• 2003 SAE AMS5529G-2003 Steel, Corrosion Resistant, Sheet and Strip 17Cr 7.1Ni 1.1Al Solution Heat Treated and Cold Rolled, Precipitation Hardenable 0.0015 to 0.050 Inch (0.038 to 1.27 mm) Nominal Thickness
• 2002 SAE AMS5529F-2002 Steel@ Corrosion Resistant@ Sheet and Strip 17Cr - 7.1Ni - 1.1Al Solution Heat Treated and Cold Rolled@ Precipitation Hardenable 0.0015 to 0.050 Inch (0.038 to 1.27 mm) Nominal Thickness (UNS S17700)
• 2002 SAE AMS5529E-2002 Steel, Corrosion Resistant, Sheet and Strip 17Cr - 7.1Ni - 1.1Al Solution Heat Treated and Cold Rolled, Precipitation Hardenable 0.0015 to 0.050 Inch (0.038 to 1.27 mm) Nominal Thickness
• 1995 SAE AMS5529E-1995 Steel@ Corrosion Resistant@ Sheet and Strip 17Cr - 7.1Ni - 1.1AL Solution Heat Treated and Cold Rolled@ Precipitation Hardenable 0.0015 to 0.050 Inch (0.038 to 1.27 mm) Nominal Thickness (UNS S17700)
• 1995 SAE AMS5529D-1995 Steel, Corrosion Resistant, Sheet and Strip 17Cr - 7.1Ni - 1.1Al Solution Heat Treated and Cold Rolled, Precipitation Hardenable 0.0015 to 0.050 Inch (0.038 to 1.27 mm) Nominal Thickness
• 1989 SAE AMS5529D-1989 STEEL SHEET AND STRIP CORROSION RESISTANT 17Cr - 7.1Ni - 1.1Al Solution Heat Treated and Cold Rolled Precipitation Hardenable 0.0015 to 0.100 inch (0.038 to 1.27 mm) Nominal Thickness (UNS S17700)
• 1980 SAE AMS5529F-1980 STEEL SHEET AND STRIP, CORROSION RESISTANT 17Cr - 7.1Ni - 1.1Al Cold Rolled, Precipitation Hardenable 0.0015 to 0.050 In. (0.038 - 1.27 mm) Nominal Thickness
• 1974 SAE AMS5529B-1974 STEEL SHEET AND STRIP, CORROSION RESISTANT 17Cr - 7.1Ni - 1.1Al Cold Rolled, Precipitation Hardenable
• 1957 SAE AMS5529A-1957 STEEL SHEET AND STRIP, CORROSION RESISTANT 17Cr - 7Ni - 1Al Precipitation Hardening - 200,000 psi
• 1954 SAE AMS5529-1954 STEEL SHEET AND STRIP, CORROSION RESISTANT 17Cr - 7Ni - 1Al Precipitation Hardening - 200,000 psi