SAE J1113/24-2000
Immunity to Radiated Electromagnetic Fields; 10 kHz to 200 MHz Crawford TEM Cell and 10 kHz to 5 GHz Wideband TEM Cell

Standard No.
SAE J1113/24-2000
Release Date
2000
Published By
Society of Automotive Engineers (SAE)
Status
Replace By
SAE J1113/24-2006
Latest
SAE J1113/24-2010
Scope
This part of SAE J1113 specifies TEM cell test methods and procedures for testing the electromagnetic immunity of electronic components (DUTs) for passenger cars, commercial vehicles and similar applications. Methods using the constant cross-section TEM cell (Crawford TEM) and the flared cross- section TEM cell (wideband TEM) are discussed in the document. The electromagnetic disturbance considered in this part of SAE J1113 will be limited to continuous narrowband electromagnetic fields. TEM cells produce both electric and magnetic fields simultaneously. The test is directly applicable to DUTs whose height is less than 1/3 the septum height; somewhat larger modules can be tested with conditions applied. The Crawford TEM and wideband TEM cell may be used for testing within the 1/3 height condition without demonstrating field uniformity within the cell, if the test set-up complies with the other provisions of this standard. This test can be used for two purposes: a. Testing the immunity of DUTs with major field coupling to the DUT and wiring harness; b. Testing the immunity of DUTs with major field coupling to the DUT. The methods defined in this document have some significant differences from ISO 11452-3. Careful deliberation has been given to the need to diverge from the international standard. The primary differences are the method of bringing leads from the DUT out of the TEM cell and the inclusion of the wideband TEM cell. Immunity measurements of complete vehicles are generally only possible by the vehicle manufacturer. The reasons, for example, are the high costs of a vehicle sized absorber lined chamber, preserving the secrecy of prototypes or the large number of different vehicle models. Therefore, for research, development and quality control a laboratory measuring method shall be applied by the component manufacturer.

SAE J1113/24-2000 history

  • 2010 SAE J1113/24-2010 Immunity to Radiated Electromagnetic Fields; 10 kHz to 200 MHz - Crawford TEM Cell and 10 kHz to 5 GHz - Wideband TEM Cell
  • 2006 SAE J1113/24-2006 Immunity to Radiated Electromagnetic Fields; 10 kHz to 200 MHz Crawford TEM Cell and 10 kHz to 5 GHz Wideband TEM Cell
  • 2000 SAE J1113/24-2000 Immunity to Radiated Electromagnetic Fields; 10 kHz to 200 MHz Crawford TEM Cell and 10 kHz to 5 GHz Wideband TEM Cell

SAE J1113/24-2000 -All Parts

SAE J1113-1-2018 Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicles@ Boats (up to 15 m)@ and Machines (Except Aircraft) (16.6 Hz to 18 GHz) SAE J1113-11-2018 Electromagnetic Susceptibility Test Procedures for Vehicle Components (Except Aircraft) SAE J1113-12-2017 Electromagnetic Susceptibility Test Procedures for Vehicle Components (Except Aircraft) SAE J1113-13-2015 Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 13: Immunity to Electrostatic Discharge SAE J1113-42-2010 Electromagnetic Susceptibility Test Procedures for Vehicle Components (Except Aircraft) SAE J1113-2-2010 Electromagnetic Susceptibility Test Procedures for Vehicle Components (Except Aircraft) SAE J1113-21-2013 Electronmagnetic Compatibility Measurement Procedure for Vehicle Components - Part 21: Immunity to Electromagnetic Fields@ 30 MHz to 18 GHz@ Absorber-Lined Chamber SAE J1113-22-2010 Electromagnetic Susceptibility Test Procedures for Vehicle Components (Except Aircraft) SAE J1113-23-2002 Electromagnetic Susceptibility Test Procedures for Vehicle Components (Except Aircraft) SAE J1113-24-2010 Electromagnetic Susceptibility Test Procedures for Vehicle Components (Except Aircraft) SAE J1113-25-200507 Electromagnetic Compatibility Measurement Procedure for Vehicle Components-Immunity to Radiated Electromagnetic Fields@ 10 KHz to 1000 MHz-Tri-Plate Line Method SAE J1113-26-202112 Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Immunity to AC Power Line Electric Fields SAE J1113-27-201710 Electromagnetic Compatibility Measurements Procedure for Vehicle Components - Part 27 - Immunity to Radiated Electromagnetic Fields@ Recommended Practice SAE J1113-28-2010 Electromagnetic Compatibility Measurements Procedure for Vehicle Components—Part 28— Immunity to Radiated Electromagnetic Fields—Reverberation Method (Mode Tuning)



Copyright ©2024 All Rights Reserved