BS EN 60255-22-3:2001
Electrical relays - Electrical disturbance tests for measuring relays and protection equipment - Radiated electromagnetic field disturbance tests

Standard No.
BS EN 60255-22-3:2001
Release Date
2001
Published By
British Standards Institution (BSI)
Status
 2008-10
Replace By
BS EN 60255-22-3:2008
Latest
BS EN 60255-26:2013
Scope
This part of IEC 60255 is based on IEC 61000-4-3, referring to that publication where applicable, and specifies the general requirements for radiated electromagnetic field disturbance tests for measuring relays and protection equipment for power system protection, including the control, monitoring and process interface equipment used with those systems. The objective of the tests is to confirm that the EUT (equipment under test) will operate correctly when energised and subjected to an electromagnetic field from a radiation source operating within the frequency range 80 MHz to 1 000 MHz. NOTE 1 The product standard IEC 60255-22-6 (based on IEC 61000-4-6) establishes the immunity of measuring relays and protection equipment over the frequency range of 0,15 MHz to 80 MHz. Also, amendment 1 (subclause 5.2) to IEC 61000-4-3 proposes to include frequencies up to 2 GHz to test for immunity against devices such as portable digital telephones. NOTE 2 The test methods defined in this standard are structured for the primary objective of establishing adequate repeatability of results at various test facilities for qualitative analysis of effects. The test methods using a portable transmitter are not taken into consideration here because the EMC directive now specifies a sweep test, calibrated field strengths must be used and the portable transmitter test is not generally reproducible. The requirements specified in this standard are applicable to measuring relays and protection equipment in an unused condition, and all tests specified are type tests only. note:* (specified in the first edition (1989) of this standard)

BS EN 60255-22-3:2001 history

  • 2014 BS EN 60255-26:2013 Measuring relays and protection equipment. Electromagnetic compatibility requirements
  • 2008 BS EN 60255-22-3:2008 Measuring relays and protection equipment - Part 22-3:Electrical disturbance tests - Radiated electromagnetic field immunity
  • 2001 BS EN 60255-22-3:2001 Electrical relays - Electrical disturbance tests for measuring relays and protection equipment - Radiated electromagnetic field disturbance tests



Copyright ©2024 All Rights Reserved