ISO 683-17:1999
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels
- Standard No.
- ISO 683-17:1999
- Release Date
- 1999
- Published By
- International Organization for Standardization (ISO)
- Status
- Replace By
- ISO 683-17:2011
- Latest
- ISO 683-17:2023
- Scope
- 1.1 This part of ISO 683 applies to the products and heat-treatment conditions given in Table 1 and the surface conditions given in Table 2. 1.2 This part of ISO 683 gives the technical delivery requirements for five groups of wrought ball and roller bearing steels as listed in Table 3, namely: a) through-hardening bearing steels (steels with about 1 % C and 1 % to 2 % Cr); b) case-hardening bearing steels; c) induction-hardening bearing steels (unalloyed and alloyed); d) stainless bearing steels; e) high temperature bearing steels. 1.3 In special cases variations in these technical delivery requirements or additions to them may form the subject of an agreement at the time of inquiry and order (see annex A). 1.4 In addition to this part of ISO 683, the general technical delivery requirements of ISO 404 are applicable.
ISO 683-17:1999 Referenced Document
- ISO 1035-1:1980 Hot-rolled steel bars; Part 1 : Dimensions of round bars
- ISO 1035-4:1982 Hot-rolled steel bars; Part 4 : Tolerances
- ISO 10474:1991 Steel and steel products; inspection documents
- ISO 14284:1996 Steel and iron - Sampling and preparation of samples for the determination of chemical composition
- ISO 3763:1976 Wrought steels; Macroscopic methods for assessing the content of non-metallic inclusions
- ISO 377:1997 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
- ISO 3887:1976 Steel, non-alloy and low-alloy; Determination of depth of decarburization
- ISO 404:1992 Steel and steel products; general technical delivery requirements
- ISO 4948-1:1982 Steels; Classification; Part 1 : Classification of steels into unalloyed and alloy steels based on chemical composition
- ISO 4967:1998 Steel - Determination of content of nonmetallic inclusions - Micrographic method using standard diagrams
- ISO 4969:1980 Steel; Macroscopic examination by etching with strong mineral acids
- ISO 5949:1983 Tool steels and bearing steels; Micrographic method for assessing the distribution of carbides using reference photomicrographs
- ISO 642:1999 Steel - Hardenability test by end quenching (Jominy test)
- ISO 643:1983 Steels; Micrographic determination of the ferritic or austenitic grain size
- ISO 6506:1981 Metallic materials; Hardness test; Brinell test
- ISO 6929:1987 Steel products; Definitions and classification Bilingual edition
- ISO 9443:1991 Heat-treatable and alloy steels; surface quality classes for hot-rolled round bars and wire rods; technical delivery conditions
- ISO/TR 9769:1991 Steel and iron; review of available methods of analysis
ISO 683-17:1999 history
- 2023 ISO 683-17:2023 Heat-treatable steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels
- 2014 ISO 683-17:2014 Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels
- 2011 ISO 683-17:2011 Heat-treatable steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels
- 1999 ISO 683-17:1999 Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels
- 1976 ISO 683-17:1976 Heat-treated steels, alloy steels and free-cutting steels; Part XVII : Ball and roller bearing steels
