This standard applies to AC two-pole appliance couplers with and without earthing contacts for household and similar purposes. The coupler is used to connect the power supply cord to appliances or other electrical equipment with a rated voltage not exceeding 250V, a rated current not exceeding 16A, and a power frequency of 50Hz or 60Hz. NOTE 1 This standard is also applicable to appliance inlets which are mounted on appliances or integral with appliances or equipment. 2 The requirements for connectors are based on the fact that the pin temperature of the corresponding appliance inlet socket does not exceed the following values: for connectors used in cold conditions, not exceeding 70 °C; for connectors used in hot conditions, not exceeding 120 °C ℃; for connectors under extremely hot conditions, not exceeding 155℃. 3 Appliance couplers complying with this standard are suitable for use in an ambient temperature which normally does not exceed 35°C, occasionally reaching 40°C 1]. 4 Appliance couplers complying with this standard are suitable for connection of equipment without special protection against moisture. If used in connection with equipment which may be exposed to splashes of liquid in normal use, the equipment shall be protected against moisture. 5 Special structures may be required in places with special conditions, such as on ships, vehicles and dangerous places where explosions may occur.
GB 17465.1-1998 history
2022GB/T 17465.1-2022 Appliance couplers for household and similar general purposes—Part 1: General requirements
2009GB 17465.1-2009 Appliances couplers for household and similar general purposes.Part 1:General requirements
1998GB 17465.1-1998 Appliance couplers for household and similar general purposes. Part 1: General requirements