1.1 This specification covers the design, manufacture, performance, operation, and testing of flow through treatment systems intended to process sewage or graywater, or both, generated during a ship’s normal service. This specification is intended for use by designers, manufacturers, purchasers, and operators of shipboard environmental pollution control equipment to determine the requirements for equipment design, manufacture, purchase, and in-service operation.
1.2 The treatment system shall be capable of meeting the effluent requirements detailed in Section 4 with respect to a ship’s operational area.
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM F2363/F2363M-17 Referenced Document
ANSI/ASSE 1001 Performance Requirements for Atmospheric Type Vacuum Breakers*, 2024-04-22 Update
ASTM A307 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strangth
ASTM A563 Standard Specification for Carbon and Alloy Steel Nuts*, 2024-04-22 Update
ASTM B117 Standard Practice for Operating Salt Spray (Fog) Apparatus
ASTM B165 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube
ASTM D1253 Standard Test Method for Residual Chlorine in Water
ASTM E11 Standard Specification for Wire Cloth and Sieves for Testing Purposes
ASTM F1030 Standard Practice for Selection of Valve Operators*, 2023-05-01 Update
ASTM F1098 Standard Specification for Envelope Dimensions for Butterfly Valves—NPS 2 to 24*, 2019-12-01 Update
ASTM F1122 Standard Specification for Quick Disconnect Couplings
ASTM F1155 Standard Practice for Selection and Application of Piping System Materials
ASTM F1166 Standard Practice for Human Engineering Design for Marine Systems, Equipment and Facilities
ASTM F1298 Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications*, 2023-05-01 Update
ASTM F1323 Standard Specification for Shipboard Incinerators
ASTM F1387 Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
ASTM F1510 Standard Specification for Rotary Positive Displacement Pumps, Commercial Ships Use
ASTM F1511 Standard Specification for Mechanical Seals for Shipboard Pump Applications
ASTM F2044 Standard Specification for Liquid Level Indicating Equipment, Electrical*, 2019-03-01 Update
ASTM F906 Standard Specification for Letters and Numerals for Ships*, 2020-02-01 Update
ASTM F992 Standard Specification for Valve Label Plates
ASTM F993 Standard Specification for Valve Locking Devices
ASTM F998 Standard Specification for Centrifugal Pump, Shipboard Use*, 2022-10-01 Update
IEEE 1580 IEEE Recommended Practice for Marine Cable for Use on Shipboard and Fixed or Floating Facilities
ISO 15705 Water quality - Determination of the chemical oxygen demand index (ST-COD) - Small-scale sealed-tube method
ISO 5815-1 Water quality — Determination of biochemical oxygen demand after n days (BODn) — Part 1: Dilution and seeding method with allylthiourea addition*, 2019-07-23 Update
ASTM F2363/F2363M-17 history
2023ASTM F2363/F2363M-17(2023) Standard Specification for Sewage and Graywater Flow Through Treatment Systems
2017ASTM F2363/F2363M-17 Standard Specification for Sewage and Graywater Flow Through Treatment Systems
2012ASTM F2363/F2363M-12 Standard Specification for Sewage and Graywater Flow Through Treatment Systems
2006ASTM F2363-06 Standard Specification for United States Coast Guard Type II or IMO MARPOL 73/78 Annex IV Marine Sanitation Devices (Flow Through Treatment)
2004ASTM F2363-04 Standard Specification for United States Coast Guard Type II or IMO MARPOL 73/78 Annex IV Marine Sanitation Devices (Flow Through Treatment)