This document specifies the classification and designation, order content, dimensions, shape, weight, technical requirements, test methods, inspection rules, packaging, marks and quality certificates of structural steel for ships and ocean engineering. This document is applicable to the manufacture of steel plates with a thickness of no more than 150 mm for hull structures such as oceangoing, coastal and inland navigation ships, fishing boats, and marine engineering structures with a thickness of no more than 250 mm, and steel strips and shear plates with a thickness of no more than 25.4 mm. , Section steel with a thickness not greater than 50 mm or bar with a diameter not greater than 50 mm (hereinafter referred to as steel).
GB/T 712-2022 Referenced Document
GB/T 11261 Steel and lron - Determination of oxygen content - The pulse heating inert gas fusion-infra-red absorption method
GB/T 1591 High strength low alloy structural steels
GB/T 17505 Steel and steel products.General technical delivery requirements
GB/T 20066 Steel and iron.Sampling and preparation of samples for the determination of chemical composition
GB/T 20123 Steel and iron - Determination of total carbon and sulfur content Infrared absorption method after combustion in an induction furnace (routine method)
GB/T 20124 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method)
GB/T 2101 General requirment of acceptance, packaging, marking and certification for section steel
GB/T 222 Permissible tolerances for chemical composition of steel products
GB/T 223.14 Methods for chemical analysis of iron,steel and alloy The N-benzoy-N-phenylhydroxylamine extraction photometric method for the determination of vanadium content
GB/T 223.19 Methods for chemical analysis of iron,steel and alloy--The neocuproine-chloroform extraction photometric method for the determination of copper content
GB/T 223.23 Iron,,steel and alloy.Determination of nickel content.The dimethylglyoxime spectrophotometric method
GB/T 223.25 Methods for chemical analysis of iron, steel and alloy.The dimethylglyoxime gravimetric method for the determination of nickel content
GB/T 223.26 Iron,steel and alloy.Determination of molybdenum content.The thiocyanate spectrophotometric method
GB/T 223.37 Iron, steel and alloy—Determination of nitrogen content—Indophenol blue spectrophotometric method after distillation separation
GB/T 223.40 Iron, steel and alloy Determination of niobium content by the sulphochlorophenol S spectrophotometric method
GB/T 223.5 Steel and iron.Determination of acid-soluble silicon and total silicon content.Reduced molybdosilicate spectrophotometric method
GB/T 223.62 Methods for chemical analysis of iron, steel and alloy--The butyl acetate extraction photometric method for the determination of phosphorus content
GB/T 223.63 Iron, steel and alloy—Determination of manganese content—Sodium (potassium) periodate spectrophotometric method
GB/T 223.67 Iron,steel and alloy.Determination of sulfur content.Methylene blue spectrophotometric method
GB/T 223.69 Iron,steel and alloy.Determination of carbon contents.Gas-volumetric method after combustion in the pipe furnace
GB/T 223.78 Methods for chemical analysis of iron,steel and alloy-Curcumin spectrophotometric method for the determination of boron content
GB/T 223.84 Steel and iron.Determination of titanium content.Diantipyrylmethane spectrophotometric method
GB/T 223.9 Iron,steel and alloy.Determination of aluminium content.Chrome azurol S photometric method
GB/T 228.1 Metallic materials—Tensile testing—Part 1: Method of test at room temperature
GB/T 229 Metallic materials—Charpy pendulum impact test method
GB/T 247 General rule of package,mark and certification for steel plates(sheets)and strips
GB/T 2970 Method for ultrasonic testing of thicker steel plates
GB/T 2975 Steel and steel products.Location and preparation of samples and test pieces for mechanical testing
GB/T 5313 Thickness direction performance steel plate*, 2023-09-07 Update
GB/T 6394 Determination of estimating the average grain size of metal
GB/T 709 "Dimension,shape,weight and tolerance for hot rolled steel strip,plate and sheet"
GB/T 8170 Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 712-2022 history
2022GB/T 712-2022 Structural steel for ship and ocean engineering
2011GB 712-2011 Ship and ocean engineering structural steel