GB/T 21098-2022 Lamp caps and holders together with gauges for the control of interchangeability and safety—Part 4: Guidelines and general information (English Version)
This document specifies the guidelines for lamp caps, lamp holders, and gauges for testing their safety and interchangeability, and establishes naming rules, fixing methods, interchangeability, and safety requirements. This document is applicable to the inspection of lamp caps and lamp holders using gauges whose functions are safety and interchangeability. According to the IEC guidelines, the new IEC standards are classified as safety standards or performance standards. In the safety standard of the light source, the "luminaire design parameters" are given for the safe work of the light source. When testing the luminaire according to this standard, it should be used as a normative appendix. It should be noted that in order for the light source to work properly, the 'luminaire design parameters' contained in the light source performance standard should be followed, but this standard does not require the performance test of the light source as part of the type test approval of the luminaire. 0.3 General requirements 0.3.3 Semi-luminaires shall be tested as luminaires. 0.5 Luminaire components 0.5.1 In addition to the overall components, the components should comply with the relevant national standards or IEC standards (if any). As a part of the luminaire, the overall component should conform to the national standard or IEC standard of the component as far as possible. NOTE: This does not mean that components need to be tested individually before luminaires are approved. 0.5.2 For those parts that meet their own standards and are used according to regulations, only those parts that are specified in the luminaire standards and the part standards (including
GB/T 21098-2022 Referenced Document
GB 7000.1 Luminaires - Part 1: General requirements and tests
GB 7000.1-2015 Luminaires - Part 1: General requirements and tests
GB/T 1312 Lampholders for tubular fluorescent lamps and starterholders
GB/T 1312-2007 Lampholders for tubular fluorescent lamps and starter holders
GB/T 1406.2-2008 Types and dimensions of lamp caps. Part 2: Pin lamp caps
GB/T 1406.3-2021 Types and dimensions of lamp caps—Part 3:Prefocus caps
GB/T 1406.4-2008 Types and dimensions of lamp caps.Part 4: Miscellaneous caps
IEC 61347-2-1 Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters)
GB/T 21098-2022 history
2022GB/T 21098-2022 Lamp caps and holders together with gauges for the control of interchangeability and safety—Part 4: Guidelines and general information
2007GB/T 21098-2007 Lamp caps and holders together with gauges for the control of safety and interchangeability.Part 4:Guidelines and general information